Nokia switch All models error codes
Codes
- 7Error codeSP-%c 100baseT craft interface failure
- 67Error codeThe SF rear module has been removed from the chassis or is not detected to be present. Maintenance or faulted SF
- 69Error codeThe SP rear module has been removed from the chassis or is not detected to be present. Maintenance or faulted SF
- 73Error codeIndicates the process to configure the protection module failed. Software bug or a component fault on the IOM that was not caught by diagnostics
- 74Error codeModule in slot %d faulted, %s(%d)
- 655Error codeIOM-%d-%s Remote Defect Indication cleared
- 656Error codeIndicates the receiver on an OC3 or OC12 interface cannot find a valid pointer in the data stream. Possible cabling fault, provisioning error or faulted IOM
- 658Error codeIndicates the receiver on an OC3 or OC12 interface indicates that the framing indicates an unequipped payload. Possible cabling fault, provisioning error or faulted IOM
- 660Error codeIndicates the receiver on an OC3 or OC12 interface is receiving a payload type that is not ATM cells. Possible cabling fault, provisioning error or faulted IOM
- 662Error codeIOM-%d-%s Trace Identifier Message Defect
- 664Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 665Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 666Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 667Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 668Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 669Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 674Error codeSTATS - SP-%c error encountered opening record buffer or buffer maint file
- 675Error codeSTATS - SP-%c error encountered reading or writing record buffer file
- 676Error codeSTATS - SP-%c error record buffer or buffer maint of incorrect length
- 677Error codeSTATS - SP-%c error encountered reading orwriting buffer maint file
- 678Error codeSTATS - error no free space in record buffer file _
- 679Error codeSTATS - SP-%c no free space error cleared
- 680Error codeSTATS - SP-%c error - %d records lost
- 681Error codeSTATS - error %c, stats init failure creating or attaching shared memory
- 682Error codeSTATS - SP-%c error record too big MaxRecordSize %d
- 686Error codeBILLING - SP-%c error encountered
- 687Error codeBILLING - SP-%c error encountered
- 688Error codeBILLING - SP-%c error record buffer or
- 689Error codeBILLING - SP-%c error encountered
- 690Error codeBILLING - SP-%c error no free space in record buffer file
- 691Error codeBILLING - SP-%c no free space error cleared
- 692Error codeBILLING - SP-%c error - %d records lost
- 693Error codeBILLING - SP-%c error %d, billing init
- 694Error codeInfo
- 700Error codeAlarm is Obsolete
- 705Error codeInfo
- 707Error codeInfo
- 709Error codeCorrupted disk file system or software or CPU subsystem error
- 711Error codeIndicates the application process on a SCP entity specified by the Point Code is not inservice. Examine the state of the SCP and applications or check if the Point Code is provisioned properly. Check the switch alarms to verify other Point Codes are in service
- 712Error codeSCCP - Routing error - Invalid route or route not available
- 713Error codeInvalid upper interface event because of: Protocol layer not active (compiled with ZP). Not provisioned or software or CPU subsystem error
- 716Error codeInvalid lower interface event because of: Protocol layer not active (not compiled with ZP). Not provisioned or software or CPU subsystem error
- 722Error codeThis event is generated if an illegal or inopportune event is received, and if an interface parameter is in error at the upper interface; SAP is not configured. Not provisioned or software or CPU subsystem error
- 724Error codeThis event is generated if an illegal or inopportune event is received, and if an interface parameter is in error at the upper interface. Protocol layer is not active. Not provisioned, layer not active or software or CPU subsystem error
- 725Error codeThis event is generated if an illegal or inopportune event is received, and if an interface parameter is in error at the lower interface; SAP is not configured. Not provisioned or software or CPU subsystem error
- 727Error codeThis event is generated if an illegal or inopportune event is received, and if an interface parameter is in error at the lower interface. Protocol layer is not active. Not provisioned or software or CPU subsystem error
- 734Error codeTCAP - Message type in the data request not expected in the current state
- 737Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 740Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 741Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error