Olivetti fotokopi makinesi All models error codes
Codes
- 1-4Error code6 Send error code...................................................................................................................1-4-29
- ABC123Error codeDefective developing roller (developing unit)
- C1Error codeDetail
- CSS11Error codeDesk cassette 1 paper rear edge sensor 1
- CSS12Error codeDesk cassette 1 paper rear edge sensor 2
- CSS13Error codeDesk cassette 1 paper rear edge sensor 3
- CSS14Error codeDesk cassette 1 paper rear edge sensor 4
- CSS21Error codeDesk cassette 2 paper rear edge sensor 1
- CSS22Error codeDesk cassette 2 paper rear edge sensor 2
- CSS23Error codeDesk cassette 2 paper rear edge sensor 3
- CSS24Error codeDesk cassette 2 paper rear edge sensor 4
- d000Error codeUnspecified error HDD unavailable USB memory is not inserted File for writing is not found in the USB File for reading is not found in the HDD USB error in writing USB error in reading USB unmount error File rename error File open error File close error
- e002Error codeParameter error File write error File initialization error File error Processing error Address book clear error (contact) Address book open error (contact) Address book list error (contact) Address book list error (contact) Address book clear error (group) Address book open error (group) Address book list error (group) Address book list error (group) Job accounting clear error Job accounting open error Job accounting open error Job accounting error in writing Job accounting list error Job accounting list error One-touch open error One-touch list error One-touch list error User managements backup error User managements clear error User managements open error User managements open error User managements open error User managements error in writing User managements list error User managements list error User managements list error User managements list error User managements open error User managements error User managements error User managements open error
- E6Error codeDetails
- E7Error codeDetail
- EEError codeCause
- F000Error codeDefective main PWB
- F1Error codeMail-bin stacker transport motor abnormality
- F2Error codeDetail
- F3Error codeCause
- F6Error codeDetails
- F7Error codeDetails
- F020Error codeDefective main memory (RAM) on the main PWB
- F22Error codeSilent mode
- F040Error codeDefective main PWB
- F041Error codeDefective main PWB
- F050Error codeDefective engine PWB
- F051Error codeDefective engine PWB
- H2Error codeDetail
- H3Error code00··· HL1 01··· HL2
- H4Error code00··· HL1 01··· HL2
- H5Error codeCause
- is1000Error codeThe altitude is 1000 m or higher and irregular horizontal white lines appear in the image
- L1Error codeCause
- L3Error codeCause
- L4Error codeDetail
- L6Error codeDetail
- L8Error codeDetail
- LD5Error codeolygon mirror motor READY signal ("L" in the constant speed rotation)
- PD1-7Error codeDocument detection sensor status
- TM1Error codeDrives the toner hopper
- U000Error codeOutputting an own-status report Description Outputs lists of the current settings of the maintenance items and paper jam and service call occurrences. Outputs the event log. Also sends output data to the USB memory. Printing a report is disabled either when a job is remaining in the buffer or when [Pause All Print Jobs] is pressed to halt printing. Purpose To check the current setting of the maintenance items, or paper jam or service call occurrences. Before initializing or replacing the backup RAM, output a list of the current settings of the mainte- nance items to reenter the settings after initialization or replacement. Method 1. Press the start key. 2. Select the item to be output using the cursor up/down keys. Display Output list MAINTENANCE List of the current settings of the maintenance modes EVENT Outputs the event log ALL Outputs the all reports 3. Press the start key. A list is output. Method: Send to the USB memory 1. Press the power key on the operation panel, and after verifying the main power indicator has gone off, switch off the main power switch. 2. Insert USB memory in USB memory slot. 3. Turn the main power switch on. 4. Enter the maintenance item. 5. Press the s
- U002Error codeSetting the factory default data Description Restores the machine conditions to the factory default settings. Purpose To move the image scanner unit to the home position. (position in which the frame can be fixed). Method 1. Press the start key. 2. Select [MODE1(ALL)] using the cursor up/down keys. 3. Press the start key. The imege scanner returns to the home position. 4. Turn the main power switch off and on. * : An error code is displayed in case of an initialization error. When errors occurred, turn main power switch off then on, and execute initialization using maintenance item U002. Error codes Codes Description 0001 Controller error 0020 Engine error 0040 Scanner error
- U004XError codeA connection was made but interrupted during handshake with the receiver unit (refer to 1-4-35 U004XX error code table)
- U006XError codeCommunication was interrupted because of a machine problem (refer to 1-4-35 U006XX error code table)
- U008XError codeA page transmission error occurred in G3 mode (refer to 1-4-35 U008XX error code table)
- U0065Error codeData was not transmitted to a modem error
- U0070Error codeCommunication was interrupted because of a problem in the destination unit
- U0080Error codeA page transmission error occurred because of reception of a RTN or PIN signal
- U0081Error codeA page transmission error reoccurred after retry of transmission in the ECM mode