Nokia switch All models error codes
Codes
- 3Error codeSP-%c nonvolatile memory read error - recoverable
- 23Error codeIndicates the IOM never indicated that it passed diagnostics and booted the Operational Code. Faulted IOM
- 24Error codeIndicates a module failed power-on diagnostics. There status code indicates which diagnostic test failed. A component fault on the IOM or an external stimulus causing a misdiagnosis
- 29Error codeIndicates the device that holds the equipment identification code and version information cannot be read by the system processor. Faulted IOM
- 30Error codeIndicates the device that holds the equipment identification code and version information cannot be read by the system processor. Faulted IOM
- 31Error codeModule in slot %d failed to boot - error
- 227Error code%s Alarm Indication Signal (Line)
- 228Error code%s Alarm Indication Signal (Line) cleared
- 229Error code%s Remote Alarm Indication (Line)
- 230Error code%s Remote Defect Indication (Line) cleared
- 231Error codeIndicates the receiver on an STS1 interface cannot find a valid pointer in the data stream. Possible cabling fault, provisioning error or faulted IOM
- 233Error codeIndicates the receiver on an STS1 interface indicates that the framing indicates an unequipped payload. Possible cabling fault, provisioning error or faulted IOM
- 235Error codePayload Mismatch (Path). Indicates the receiver on an OC3 or OC12 interface is receiving a payload type that is not ATM cells. Possible cabling fault, provisioning error or faulted IOM
- 237Error code%s Remote Failure Indication (Path)
- 238Error code%s Remote Failure Indication (Path) cleared
- 239Error code%s Remote Failure Indication (Line)
- 240Error code%s Remote Failure Indication (Line) cleared
- 241Error codePossible cabling fault, provisioning error or faulted IOM
- 243Error code%s Payload Defect Indication (Path)
- 244Error code%s Payload Defect Indication (Path) cleared
- 245Error code%s Parity Error
- 246Error code%s Parity Error cleared
- 253Error code%s Device Error
- 254Error codeIOM-%d-STS1-%d-Port-%d Loss of Signal. Possible cabling fault, provisioning error or faulted IOM
- 256Error codeIndicates a T1 LOF on a T1 in an STS or DS3. Possible cabling fault, provisioning error or faulted IOM
- 258Error code%s Alarm Indication SignalS
- 259Error code%s Alarm Indication Signal cleared
- 260Error code%s Remote Alarm Indication
- 261Error code%s Remote Alarm Indication cleared
- 262Error code%s Alarm Indication Signal (Vt)
- 263Error code%s Alarm Indication Signal (Vt) cleared
- 264Error code%s Remote Defect Indication (Vt)
- 265Error code%s Remote Defect Indication (Vt) cleared
- 266Error codeIndicates the receiver on a T1 of an OC3 or OC12 interface cannot find a valid pointer in the data stream. Possible cabling fault, provisioning error or faulted IOM
- 268Error codeIndicates the receiver on a T1 of an OC3 or OC12 interface indicates that the framing indicates an unequipped payload. Possible cabling fault, provisioning error or faulted IOM
- 270Error codeIndicates the receiver on a T1 of an OC3 or OC12 interface is receiving a payload type that is not ATM cells. Possible cabling fault, provisioning error or faulted IOM
- 272Error code%s Remote Defect Indication (Vt)
- 273Error code%s Remote Defect Indication (Vt) cleared
- 274Error code%s Payload Defect Indication (Vt)
- 275Error code%s Paylod Defect Indication (Vt) cleared
- 285Error codeIndicates an IOM is using not using the correct clock from the SP-A or SP-B module. Faulted IOM or SP
- 287Error codeIOM-%d - BITS timing voting error
- 288Error codeIOM-%d - BITS timing voting error cleared
- 289Error codeIndicates the T1 input (A or B) on the Timing Module cannot detect a signal. Cabling or faulted SP TMG
- 293Error codeTMG-%c - Alarm Indication Signal on BITS Input %c
- 294Error codeTMG-%c - Alarm Indication Signal on BITS Input %c cleared
- 296Error codeIndicates the Stratum Clock is not connected to a valid timing source (both inputs have faulted) so the Stratum Clock is operating in hold-over
- 306Error codeTMG-%c - Maintenance Link Error(%d)
- 309Error codeTMG-%c - Hardware failure
- 310Error codeTMG-%c - Hardware failure cleared