Nokia switch All models error codes
Codes
- 2Error codeSP-%c nonvolatile memory read/write failure
- 17Error codeSP-%c 100baseT internal fault on management interface
- 18Error codeThis alarm is obsolete
- 21Error codeIndicates the maintenance link to the module did not clear its error status in the allotted time. Faulted hardware on the indicated module or faulted SF
- 153Error codeSF-%c receiving ATM CRC error from IOM-%d
- 154Error codeIOM-%d transmitting ATM CRC errors to SF(s)
- 155Error codeSF-%c to IOM-%d CRC Error
- 156Error codeSF-%c to IOM-%d Decode Error
- 157Error codeSF-%c to IOM-%d Missing Sync Error
- 158Error codeIOM-%d Receiving Errors from both SFs
- 159Error code%s - error in SF-%c to IOM-%d signal
- 160Error codeIndicates a electrical communication problem between the IOM and the Switch Fabric. IOM to SF transmitter is faulted on IOM or IOM to SF receiver is faulted on SF
- 161Error codeIOM-%d to SF-%c maintenance link data transfer error
- 162Error codeIndicates read/write operations are not completing on maintenance link to the designated IOM. Faulted IOM or SF
- 163Error codeerror in SF-%c to SP/TMG-%c signal
- 164Error codeIndicates the Maintenance Link serial connection from the SP to the SF is faulted. Faulted SP or SF
- 165Error codeSP/TMG-%c to SF-%c maintenance link data transfer error
- 166Error codeIndicates the Maintenance Link serial connection from the SP to the SF is faulted. Faulted SP or SF
- 167Error codeIOM-%d-PORT-%d Device Error
- 169Error codeInfo
- 170Error codeIndicates that applications on the IOM (framer driver or layer 2 signaling) are not returning acknowledges to commands even though communication with the IOM is functioning. Software or CPU subsystem error on the IOM or mismatch in software versions between the SP and the IOM
- 171Error codeIndicates there is no input signal on a T1 on a T1 IOM. Possible cabling fault, provisioning error or faulted IOM
- 173Error codeIndicates there is framing cannot be detected on an input signal for a T1 on a T1 IOM. Possible cabling fault, provisioning error or faulted IOM
- 175Error codeIOM-%d-PORT-%d Alarm Indication Signal
- 176Error codeIOM-%d-PORT-%d Alarm Indication Signal cleared
- 177Error codeIOM-%d-PORT-%d Remote Alarm Indication
- 178Error codeIOM-%d-PORT-%d Remote Alarm Indication cleared
- 180Error codeIOM-%d-PORT-%d Internal Loopback test failure
- 181Error codeIOM-%d-PORT-%d Internal Loopback test failure cleared
- 182Error codeIOM-%d-PORT-%d External loopback test failure
- 183Error codeIOM-%d-PORT-%d External Loopback test failure cleared
- 184Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 194Error codeIOM-%d faulted - %s
- 195Error codeIOM-%d Device Error
- 196Error codeIndicates a software error. Software or CPU subsystem error on the IOM or mismatch in software versions between the SP and the IOM
- 197Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 200Error code%d Device Error
- 201Error codeIndicates there is no input signal on a T3. Possible cabling fault, provisioning error or faulted IOM
- 203Error codeIndicates there is framing cannot be detected on a input signal for a T3. Possible cabling fault, provisioning error or faulted IOM
- 205Error code%s Alarm Indication Signal
- 206Error code%s Alarm Indication Signal cleared
- 207Error code%s Remote Alarm Indication
- 208Error code%s Remote Alarm Indication cleared
- 218Error code%d Device Error
- 219Error codeIOM-%d-STS1-%d Loss of Signal. Possible cabling fault, provisioning error or faulted IOM
- 221Error codeIOM-%d-STS1-%d Loss of Frame. Possible cabling fault, provisioning error or faulted IOM
- 223Error code%s Alarm Indication Signal (Path)
- 224Error code%s Alarm Indication Signal (Path) cleared
- 225Error code%s Remote Alarm Indication (Path)
- 226Error code%s Remote Defect Indication (Path) cleared