Diesse sedimantasyon cihazı All models error codes
Codes
- SP153Error codeCINP
- SP154Error codeCODRL*
- SP155Error codeCODRH*
- SP161Error codeIQGC0*
- SP162Error codeIDGC0*
- SP163Error codeIQGC1*
- SP164Error codeIDGC1*
- SP177Error codeSPECS*
- SP183Error codeSYNV
- SP185Error codeSINP
- SP186Error codeSODR*
- SP187Error codeIQGS*
- SP188Error codeIDGS*
- SP193Error codeSPECT*
- SP198Error codeVCGT*
- SP200Error codeFFCI*
- SP213Error codeLPF
- SP217Error codeTINP
- SP218Error codeTODR*
- SP219Error codeIQGT*
- SP220Error codeIDGT*
- SP223Error codeSPDV
- SP224Error codeSPDF
- SP230Error codeWIH
- SP237Error codeKSCP*
- SP249Error codeSMO
- SP250Error codeLMO
- SP257Error codeMotor constant (H coil)
- SP297Error codeMotor constant (M coil)
- SP321Error codeMotor constant (L coil)
- SV009Error codeIQA
- SV010Error codeIDA
- SV011Error codeIQG
- SV012Error codeIDG
- SV013Error codeILMT
- SV014Error codeILMTsp
- SV015Error codeFFC
- SV016Error codeType 1: When SV027 (SSF1)/bit9, 8 (lmc)=01 Set the compensation amount based on the motor torque before the quadrant change. The standard setting is "100". Setting to "0" means the compensation amount is zero. Normally, use Type 2
- SV017Error codeSPEC*
- SV021Error codeOLT
- SV022Error codeOLL
- SV025Error codet the detector type. The value determined for each motor type is input to “xx” in the lowing table. Motor end detector type OSE104 OSA104 OSE105/OSA105 Speed command Master axis =00xx Master axis =11xx Master axis =22xx synchronous Slave axis =C0xx Slave axis =C1xx Slave axis =C2xx control Current command Master axis =00xx Master axis =11xx Master axis =22xx synchronous Slave axis =CCxx Slave axis =CCxx Slave axis =CCxx control
- SV030Error codeIVC
- SV031Error codeType 1: When SV027 (SSF1)/bitB, A (ovs)=01 Set the compensation amount based on the motor’s stall current. This compensates overshooting that occurs during pulse feeding. Normally, use Type 2
- SV037Error codeJ m : Motor inertia Jl : Motor axis conversion load inertia
- SV040Error codeLMCT
- SV045Error codeTRUB
- SV054Error codeORE
- SV081Error codeSPEC2*