Error code

Diesse sedimantasyon cihazı All models code SP257

No approved translation for this record yet; showing the original text.

Meaning

Motor constant (H coil)

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

Possible causes

This parameter is valid only in the following two conditional cases: (a) In case that SP034 (SFNC2)/bit0=1 and SP034 (SFNC2)/bit2=0 Set the motor constants when using a special motor, not described in the SP040 (MTYP) explanation and when not using the coil changeover motor. (b) In case that SP034 (SFNC2)/bit0=1 and SP034 (SFNC2)/bit2=1 Set the motor constant of the H coil of the coil changeover motor. (Note) It is not allowed for the user to change the setting. (HEX setting)

Solution

Solution steps are available to members and are not shown on this page. Answer the questions to open the solution.

Remote technician support

Get help from a technician over a video call.

Send a message Voice call Video call