Xerox Tüm modeller arıza kodları
Kodlar
- 8-1Arıza kodu
- 8-6Arıza koduRegistration Sensor
- 8-8Arıza koduRegistration Gate Sensor
- 8-10Arıza koduBypass Size Sensor
- 8-16Arıza koduHigh Capacity Feed Elevator Motor
- 8-20Arıza koduPaper Path Drive Motor
- 8-21Arıza koduHigh Capacity Feeder Feed Motor
- 8-50Arıza koduDuplex Drive Motor (low speed)
- 8-51Arıza koduDuplex Drive Motor (high speed)
- 8-52Arıza koduDuplex Inverter Sensor
- 8-56Arıza koduDuplex Module Entrance Sensor
- 8-68Arıza koduDuplex Side Guide Motor (forward
- 8-69Arıza koduDuplex Side Guide Motor (reverse)
- 8-70Arıza koduDuplex Side Guide Sensor
- 9-1Arıza kodu
- 9-5Arıza koduHVPS/Main Drive Motor
- 9-7Arıza koduToner Sensor (Front Door must be closed)
- 9-9Arıza koduLow Toner Sensor
- AArıza koduFeed Motor 2 (or 3) activating signal
- ACArıza koduAlternating Current
- BArıza koduFeed Motor 2 (or 3) activating signal
- C1Arıza kodu0: Tray 1 fed paper did not actuate Tray 1 Takeaway Sensor in time after Tray 1 feed motor
- C2Arıza kodu0: Tray 2 fed paper did not actuate Tray 2 Takeaway Sensor in time after Tray 2 Feed Motor
- C3Arıza kodu0: Bypass fed paper did not actuate IOT Registration Sensor in time after Bypass Feed
- C4-1Arıza koduTray 1 fed paper did not actuate Registration Sensor in time
- C4-2Arıza koduTray 2 fed paper did not actuate Registration Sensor in time
- C4-3Arıza koduTray 1 fed paper actuated Registration Sensor too early after Tray 1 Feed Motor is ener-
- C4-4Arıza koduTray 2 fed paper actuated Registration Sensor too early after Tray 2 Feed Motor is ener-
- C4-5Arıza koduTwo-side fed paper did not actuate Registration Sensor in time
- C4-6Arıza koduTwo-side fed paper actuated Registration Sensor too early
- C5Arıza kodu0: Tray 1 No Paper Sensor is not actuated
- C6Arıza kodu0: Tray 2 No Paper Sensor is not actuated
- CN2Arıza koduF-42
- CR1Arıza kodu
- DCArıza koduDirect Current
- ENS1Arıza kodu
- H1-4Arıza koduHCF (Tray 5) Elevator Lift problem - Upper Limit Sensor is not actuated
- H2-1Arıza koduDuplex (Tray 4) Communication problem
- H2-2Arıza koduDuplex (Tray 4) Side Guide positioning failure
- H6-1Arıza koduDADF Width Sensor actuated at power on (DADF Reg sensor not actuated)
- H6-2Arıza kodu
- H6-3Arıza koduDADF Belt Drive Motor lost the 24v line
- H6-4Arıza kodu
- ith2000Arıza koduE2-D
- J508Arıza kodu
- J509Arıza koduConnects the Duplex Motor
- J510Arıza kodu
- J511Arıza koduConnector Inside the Exit Motor
- J513Arıza kodu
- J515Arıza kodu