Hitachi sunucu şasi backplane Tüm modeller arıza kodları
Kodlar
- A13Arıza koduO/OI-L input active range start voltage
- A14Arıza koduO/OI-L input active range end voltage
- A21Arıza koduMulti-speed frequency settings (for both motors)
- A39Arıza koduJog stop mode • 00 Free-run stop, jogging disabled during motor run • 01 Controlled deceleration, jogging disabled during motor run • 02 DC braking to stop, jogging disabled during motor run
- A44Arıza koduV/f characteristic curve selection • 00 V/f constant torque • 01 V/f variable torque • 02 Sensorless vector control
- A76Arıza koduPV source setting • 00 [OI] terminal (current input) • 01 [O] terminal (voltage input)
- A82Arıza koduAVR voltage select
- AO1Arıza kodu
- B01Arıza kodu
- B02Arıza koduAllowable under-voltage power failure time
- B03Arıza koduRetry wait time before motor restart
- B21Arıza kodu
- B22Arıza koduOverload restriction setting
- B23Arıza koduDeceleration rate at overload restriction
- B88Arıza kodu
- B89Arıza kodu
- B92Arıza koduCooling fan control • 00 Fan always ON • 01 Fan ON during Run, OFF during Stop
- C24Arıza koduAlarm relay terminal function
- C33Arıza koduAlarm relay terminal active state
- C41Arıza koduOverload level setting
- D02Arıza koduOutput current monitor
- E01Arıza kodu
- E02Arıza koduOver current event during deceleration
- E03Arıza koduOver current event during acceleration
- E04Arıza kodu• DC braking power(A 54) set too _ high • Current transformer / noise error
- E05Arıza kodu
- E07Arıza kodu
- E08Arıza kodu• Built-in EEPROM memory experi- enced noise, high temperature, etc
- E09Arıza kodu
- E10Arıza kodu
- E11Arıza kodu• Built-in CPU had internal error
- E13Arıza kodu
- E14Arıza kodu
- E15Arıza kodu
- E21Arıza kodu• Inverter internal temperature is above the threshold
- F202Arıza koduAcceleration (1) time setting, 2nd motor
- F203Arıza koduDeceleration (1) time setting, 2nd motor
- H01Arıza koduAuto-tuning Setting • 00 Auto-tuning OFF • 01 Auto-tune (measure motor resis- tance and inductance, without rotating) • 02 Auto-tune (rotate motor)
- H1Arıza kodu
- H02Arıza koduMotor data selection • 00 Standard motor data • 01 Auto-tuning data • 02 Adaptive tuning data
- H03Arıza koduMotor capacity
- H04Arıza koduMotor poles setting • 2 poles • 4 poles • 6 poles • 8 poles
- H05Arıza koduMotor speed constant
- H06Arıza koduMotor stabilization constant
- H20Arıza koduMotor constant R1
- H21Arıza koduMotor constant R2
- H22Arıza koduMotor constant L
- H23Arıza koduMotor constant I0
- H24Arıza koduMotor Constant J
- H032Arıza koduAuto-tuned motor constant L