Hitachi sunucu şasi backplane Tips give a special instruction that can arıza kodları
Kodlar
- C074Arıza koduCommunication parity selection
- C075Arıza koduCommunication stop bit selection
- C076Arıza kodu
- C077Arıza kodu
- C078Arıza koduCommunication wait time
- C081Arıza kodu
- C082Arıza kodu
- C241Arıza koduOverload level setting, 2nd motor
- D001Arıza kodu
- D002Arıza kodu
- D013Arıza kodu
- D081Arıza koduDisplays trip event informa- tion: • Error code • Output freq. at trip point • Motor current at trip point • DC bus voltage at trip point • Cumulative inverter opera- tion time at trip point • Cumulative power-ON time at trip point
- E1Arıza kodu
- E02Arıza koduOver-current event during deceleration
- E2Arıza kodu
- E03Arıza koduOver-current event during acceleration
- E3Arıza kodu
- E04Arıza koduOver-current event during other conditions
- F001Arıza koduStandard default target frequency that determines constant motor speed, range is 0.0 / start frequency to 400 Hz
- F202Arıza koduStandard default acceleration, 2nd motor, range is 0.01 to 3000 sec
- F203Arıza koduStandard default deceleration, 2nd motor, range is 0.01 to 3000 sec
- H006Arıza koduMotor constant (factory set), range is 0 to 255
- H203Arıza koduMotor capacity, 2nd setting
- H204Arıza koduMotor poles setting, 2nd motor
- H206Arıza koduMotor constant (factory set), range is 0 to 255
- P045Arıza kodu
- P048Arıza kodu