Nokia switch All models error codes
Codes
- 14Error codeSP-%c 100baseT internal fault on signaling interface
- 15Error codeThere is no valid Ethernet signal detected on the management Ethernet of the designated SP. Disconnected cable, Ethernet hub/switch has failed or lost power or faulted ENET chip on rear SP
- 127Error codeIndicates a software error. Software or CPU subsystem error on the IOM or mismatch in software versions between the SP and the IOM
- 130Error codeThe TL1 Agent had a formatting error
- 135Error codeIndicates a software error. Corrupted disk file system or software or CPU subsystem error
- 136Error codeThe ATM Port Controller on the indicated SF module failed its power-up diagnostics. Faulted SF or faulted Timing device on the Working SP
- 137Error codeA hardware fault was detected on the ATM Port Controller device on the Switch Fabric Module. Faulted SF
- 138Error codeThe ATM Port Controller on the indicated SF module failed its power-up diagnostics. Faulted SF or faulted Timing device on the Working SP
- 139Error codeA parity fault was detected on an ATM switch fabric device named ACE on the Switch Fabric Module. Faulted SF
- 140Error codeAn overrun fault was detected on an ATM switch fabric device named ACE on the Switch Fabric Module. Faulted SF
- 141Error codeA parity fault was detected on an ATM switch fabric device named ASX on the Switch Fabric Module. Faulted SF
- 142Error codeAn overrun fault was detected on an ATM switch fabric device named ASX on the Switch Fabric Module. Faulted SF or an IOM caused an overrun condition
- 143Error codeA CRC fault was detected on an ATM switch fabric device named ASX on the Switch Fabric Module. Faulted SF
- 144Error codeA parity fault was detected on an ATM switch fabric device named ASX on the Switch Fabric Module. Faulted SF
- 145Error codeA list fault was detected on an ATM switch fabric device named ASX on the Switch Fabric Module. Faulted SF or an IOM caused an overrun condition
- 146Error codeA list fault was detected on an ATM switch fabric device named ASX on the Switch Fabric Module. Faulted SF or an IOM caused an overrun condition
- 147Error codeSF-%c from APC on SF-%c Input Port Parity Error Detected by the ATM Switch(ASX)
- 148Error codeAn overrun fault was detected on an ATM switch fabric device named APC on the Switch Fabric Module. Faulted SF or an IOM caused an overrun condition
- 149Error codeSF-%c receiving errored signal from SF-%c
- 150Error codeSF-%c receiving errored signal from IOM- %d
- 151Error codeIOM-%d transmitting comm errors to SF(s)
- 152Error codeSF-%c receiving ATM CRC error from SF- %c
- 1214Error code%s - Signal Defect Line cleared
- 1215Error codePossible cabling fault, provisioning error or faulted IOM
- 1217Error codePossible cabling fault, provisioning error or faulted IOM
- 1219Error codePossible cabling fault, provisioning error or faulted IOM
- 1221Error codePossible cabling fault, provisioning error or faulted IOM
- 1223Error codePossible cabling fault, provisioning error or faulted IOM
- 1225Error code%s - Remote Failure Indication Server
- 1226Error code%s - Remote Failure Indication Server Path cleared
- 1227Error code%s - Remote Failure Indication Connectivity Path
- 1228Error code%s - Remote Failure Indication Connectivity Path cleared
- 1229Error code%s - Remote Failure Indication Payload Path
- 1230Error code%s - Remote Failure Indication Payload Path cleared
- 1231Error code%s - APS Signal Failure
- 1232Error code%s - APS Signal Failure cleared
- 1233Error code%s - APS Signal Defect
- 1234Error code%s - APS Signal Defect cleared
- 1235Error code%s - Device Error
- 1246Error codePossible cabling fault, provisioning error or faulted IOM
- 1248Error code%s Remote Failure Indication Line
- 1249Error code%s Remote Failure Indication Line cleared
- 1250Error codePossible cabling fault, provisioning error or faulted IOM
- 1252Error codePossible cabling fault, provisioning error or faulted IOM
- 1254Error code%s Signal Failure Line
- 1255Error code%s Signal Failure Line cleared
- 1256Error code%s Signal Defect Line
- 1257Error code%s Signal Defect Line cleared
- 1263Error codeDATA SERVER - %s encountered data error - manual file cleanup necessary
- 1264Error codeDATA SERVER - %s cleanup successful - data error cleared