Hyosung ATM All models error codes
Codes
- D00AError codeFS out (after account balance)
- D00BError codeSequence Number MISMATCHED
- D0300Error codeModem is not responding
- D0301Error codeThe target call address has call blocking enabled
- D0302Error codeThe specified terminal identifier is invalid
- D0305Error codeThe specified country/region code is invalid
- D0306Error codeThe operation failed for an unspecified or unknown reason
- D0307Error codeInsufficient resources to complete the operation
- D1000Error codeNo connection
- D1100Error codeCannot receive ENQ from the host
- D1200Error codeTransmission error : Failed to receive requesting the modem to send the data
- D1300Error codeReceiving NAK more than 3 times
- D1401Error codeDisconnected by Unknown Reason
- D1402Error codeDisconnected by rejected call from remote party
- D1403Error codeDisconnected because the local phone was picked up
- D1404Error codeDisconnected by Forwarded
- D1405Error codeDisconnected by Unreachable
- D1406Error codeDisconnected by Congestion
- D1407Error codeDisconnected by Incompatible
- D1408Error codeDisconnected by unknown reason
- D1409Error codeDisconnected by Bad Address
- D1410Error codeDisconnected by Unavailable
- D1500Error code1. Modem dial connection time-out (while dialing the modem) 2. No response from host for 60 seconds
- D1601Error codeDisconnected by Bad Address
- D1602Error codeDisconnected by Unavailable
- D1603Error codeDisconnected by Out of Order
- D1707Error codeNAK yeniden deneme hatası
- D1709Error codeModem initialize fail
- D1800Error codeNo Dial Tone(in Modem dial connection)
- D2000Error codeDial(Line) busy Try again later
- D2200Error codenot receiving EOT from HOST
- D2300Error codeNo response from Host - Dialing time out to Host
- D4101Error codeNo CRC Received
- DA0xError codeHost Denial Error Refer to E7
- E0001Error code2. Host response message time-out (60Sec) RMS port failure RMS response time-out RMS modem failure RMS no dial tone The nuber of bills is not set. Surchage Owner is not set in Surcharge Enable mode. Surcharge Amount is not set in Surcharge Enable mode. Refresh timer is not set in Advertisement Enable mode. Advertisement text is not set in Advertisement Enable mode. Dispense limite setting error Ex) Dispense Limit > Face value of the note type x 25 Note type setting error Fast cash setting error Ex) Fast cash value > Dispense limit Master key index invalid : 0 <= MKEY Index <= 15 Master key empty Host phone number is not set. The error retry timer is not set
- F000AError codeMaster Key empty
- F000BError codeHost Phone Number is not inputted
- F000CError codeError Retry Timer is not inputted
- F000DError codeRMS Password is not inputted in RMS Enable
- F000EError codeRMS Phone Number is not inputted in RMS Enable
- F001FError codeMachine serial number is not set
- F002FError codeHost type is not set
- F003FError codeCommunication ID invalid (only triton)
- F5Error codeTable
- F0009Error codeMaster Key Index invalid
- F0010Error codeRouting ID is not inputted
- F0011Error codeMaster Key Serial Number is not inputted
- F0012Error codeNon-Cash Type text is not inputted
- F0015Error codeATM Serial No. Empty
- F0016Error codeDefault master password was not changed