Hitachi hava perdesi All models error codes
Codes
- b113Error codeFree-V/f voltage 7
- b126Error codeBrake release current
- b130Error codeOvervoltage suppression enable
- b133Error codeConstant DC bus voltage control P gain
- b134Error codeConstant DC bus voltage control I gain
- b212Error codeElectronic thermal level, 2nd-motor
- b213Error codeElectronic thermal characteristic selection, 2nd- motor
- b221Error codeOverload restriction 1 mode selection, 2nd-motor
- b222Error codeOverload restriction 1 active level, 2nd- motor
- b223Error codeOverload restriction 1 action time, 2nd- motor
- b910Error codeCommon electronic thermal for motor and inverter
- bA-30Error code
- bA-70Error code00(Always ON)/ 01(While inverter operates)/ 02(Depends on temperature)
- bA101Error codeUpper frequency limit source selection, 1st-motor
- bA102Error codeUpper frequency limit, 1st-motor
- bA103Error codeLower frequency limit, 1st-motor
- bA121Error codeInverter rated Current ×(0.0 to 2.0)(A)
- bA123Error codeInverter rated current ×(0.2 to 2.0)(A)
- bA127Error codeInverter rated current ×(0.2 to 2.0)(A)
- bA140Error code
- bb-43Error codeInverter rated current ×(0.2 to 2.0)(A)
- bb-46Error codeInverter rated current ×(0.0 to 2.0)(A)
- bb-61Error code00(Warning)/ 01(Error)
- bb-82Error code00(Warning)/ 01(Error)
- bb-85Error code00(Warning)/ 01(Error)
- bb101Error codeCarrier frequency setting, 1st-motor
- bb103Error code00(Disable)/ 01(Enable: Current)/ 02(Enable: Temperature)
- bb160Error codeInverter rated ND current × (0.2 to 2.2) (A)
- bC110Error codeInverter rated current × (0.0 to 3.0)(A)
- bC121Error codeInverter rated current × (0.0 to 3.0)(A)
- bC123Error codeInverter rated current × ×(0.0 to 3.0)(A)
- bC125Error codeInverter rated current × ×(0.0 to 3.0)(A)
- bd-04Error code00(Maintain current status)/ 01(Disable)/ 02(Trip)
- C021Error codeOutput terminal function
- C027Error code[Ao2] Output monitor selection (PWM/ Pulse output)
- C028Error code[Ao1] Output monitor selection (Analog output monitor)
- C030Error code[Ao2] Output reference value (at digital output current monitor)
- C038Error codeLow current signal output mode selection
- C039Error codeLow current detection level
- C040Error codeOverload signal output mode selection
- C041Error codeOverload warning level
- C061Error codeElectronic thermal warning level (Motor)
- C064Error codeCooling fin overheat warning level
- C071Error codeRS485 communication baud rate selection
- C072Error codeRS485 communication node address
- C074Error codeRS485 communication parity selection
- C075Error codeRS485 communication stop bit selection
- C076Error codeRS485 communication error selection
- C077Error codeRS485 communication timeout
- C078Error codeRS485 communication wait time