Toshiba All models error codes
Codes
- E-76Error codeBordür tuşu ....................................................................
- E-78Error codel Çoğalt tuşu Bir deseni çoğaltmak için bu tuşa basın.
- E-79Error codeh Ekle tuşu Başka bir deseni düzenleme desenine eklemek için bu tuşa basın.
- E-81Error codeOk tuşları ..........................................................
- E-83Error codebirleşik desenler .........................................................
- E9Error codeısıtmada Soğuk Üfleme Koruması
- E721Error codeJam not reaching the read sensor: The original P. 5-29
- E722Error codeJam not reaching the exit sensor (during scanning): P. 5-30
- E723Error codeJam not reaching the reverse sensor (during scan- P. 5-30
- E724Error codeStop jam at the registration sensor: The trailing P. 5-30
- E725Error codeStop jam at the read sensor: The trailing edge of the P. 5-31
- E726Error codeTransport/exit signal reception jam: RADF receives P. 5-31
- E731Error codeStop jam at the exit sensor: The trailing edge of the P. 5-32
- E741Error codeStop jam at the reverse sensor: The trailing edge of P. 5-32
- E742Error codeJam not reaching the reverse sensor (during P. 5-33
- E743Error codeJam not reaching the exit sensor (during reverse P. 5-33
- E860Error codeRADF jam access cover open: The RADF jam P. 5-34
- E870Error codeRADF open jam: RADF has opened during RADF P. 5-34
- E910Error codeFinisher jam Jam at the bridge unit transport sensor-1: The P. 5-35
- E920Error codeStop jam at the bridge unit transport sensor-1: The P. 5-35
- E930Error codeJam at the bridge unit transport sensor-2: The trail- P. 5-35
- E940Error codeStop jam at the bridge unit transport sensor-2: The P. 5-35
- E950Error codeJob separator jam Jam not reaching the job separator transport sen- P. 5-11
- E951Error codeStop jam at the job separator transport sensor: The P. 5-11
- E960Error codeOffset tray jam Jam not reaching the offset tray transport sensor: P. 5-11
- E961Error codeStop jam at the offset tray transport sensor: The P. 5-11
- EA10Error codeFinisher jam Paper transport delay jam: The paper which has P. 5-37
- EA20Error codePaper transport stop jam: The paper does not pass P. 5-38
- EA30Error codePower-ON jam: Paper exists at the inlet sensor P. 5-39
- EA40Error codeDoor open jam: The finisher has been released P. 5-40
- EA50Error codeStapling jam: Stapling is not performed properly. P. 5-41
- EA60Error codeEarly arrival jam: The inlet sensor detects the paper P. 5-42
- EA70Error codeStack delivery jam: It cannot deliver the stack of P. 5-43
- EB30Error codeFinisher jam Ready time time-out jam: The equipment judges P. 5-46
- EB50Error codePaper transport jam Paper remaining on the transport path: The multiple P. 5-12
- EB60Error codePaper remaining on the transport path: The multiple P. 5-14
- EEError codea distance of 85 mm from the incused line.
- ELError codeC123 100 VCC33 C217 10UF
- EL-01Error code(*1) ajuste (*1)
- ENError codeor more 1 Installation
- EOError codeStatus Error
- EO-40Error codeEO CO EO EO FO 74
- EO-47Error codeEO C7 EO EO FO *1
- EO-48Error codeEO C8 EO EO FO 68
- EO-49Error codeEO C9 EO EO FO 70
- EO-50Error codeEO EO EO FO 72 *1
- EO-51Error codeEO EO 7A EO FO 7A *1
- EO-52Error codeEO EO EO FO 70 *1
- ESError code• To install the drain hose, insert the drain hose
- EVError codeısıtma konumuna