Mercedes-Benz All models error codes
Codes
- HTCU01B9E0E5Error codeOpen circuit in the OTV Tank 7
- HTCU01B9E0E6Error codeShort circuit in the pressure sensor of Tank 6
- HTCU01B9E0ECError codeOTV Tank 1 Control current deviation too high
- HTCU01B9E1E0Error codeMinor Park Leakage Detected in Tank 7
- HTCU01B9E1E3Error codeReserved for future - 7
- HTCU01B9E1E5Error codeDrive OFF Prevention Evaluation Malfunction
- HTCU01B9E1E6Error codeShort to Battery in the RDI power supply pin
- HTCU01B9E1E9Error codeHybrid CAN timeout
- HTCU01B9E1ECError codeInternal Error in the RDI
- HTCU01BAE0E0Error codeHigh detected in the pressure sensor of Tank 1
- HTCU01BAE0E1Error codeLow detected in the pressure sensor of Tank 4
- HTCU01BAE0E2Error codeHigh voltage enable status signal is not available
- HTCU01BAE0E3Error codePressure sensor reference Over voltage Tank 7
- HTCU01BAE0E5Error codeOpen circuit in the OTV Tank 2
- HTCU01BAE0E6Error codeShort circuit in the pressure sensor of Tank 1
- HTCU01BAE0ECError codeSIV Control current deviation too high
- HTCU01BAE1E0Error codeMinor Park Leakage Detected in Tank 8
- HTCU01BAE1E1Error codeAbrupt Shutdown of FCM by withdrawal of FC Connection from ENM
- HTCU01BAE1E2Error codeProtocol out of range in the RDI
- HTCU01BAE1E3Error codeReserved for future - 8
- HTCU01BAE1E5Error codeOpen Circuit in the RDI power supply pin
- HTCU01BAE1ECError codeFuel-cell unit not available
- HTCU01BBE0E1Error codeLow detected in the pressure sensor of Tank 1
- HTCU01BBE0E2Error codeIsolation resistance value signal is not available
- HTCU01BBE0E3Error codePressure sensor reference Over voltage Tank 4
- HTCU01BBE0E4Error codePressure sensor reference under voltage Tank 7
- HTCU01BBE0E5Error codeOpen circuit in the temperature sensor Tank 4
- HTCU01BBE0E6Error codeShort circuit in the temperature sensor Tank 4
- HTCU01BBE0ECError codeOTV Tank 7 Control current deviation too high
- HTCU01BBE1E0Error codeMinor Park Leakage Detected in High Pressure Pipeline
- HTCU01BBE1E1Error codeAbrupt Shutdown of FCM by withdrawal of HW signal from ENM
- HTCU01BBE1E2Error codeError in the RDI power supply pin
- HTCU01BBE1E3Error codeReserved for future - 9
- HTCU01BBE1ECError codeMalfunction of high-voltage system
- HTCU01BCE0E1Error codeLow detected in the temperature sensor Tank 5
- HTCU01BCE0E2Error codeError in FC Contactor Enable Status from HVPN
- HTCU01BCE0E3Error codePressure sensor reference Over voltage Tank 1
- HTCU01BCE0E4Error codePressure sensor reference under voltage Tank 4
- HTCU01BCE0E5Error codeOpen circuit in the pressure sensor of Tank 7
- HTCU01BCE0E6Error codeShort circuit in the pressure sensor of Tank 7
- HTCU01BCE0ECError codeFault detected in isolation monitoring device inside the fuel-cell HV fuse box
- HTCU01BCE1E0Error codeMinor Park Leakage Detected in Medium Pressure Pipeline
- HTCU01BCE1E1Error codeFuel Cell Start Block Due to Invalid Internal HV Enable
- HTCU01BCE1E2Error codeTank Volume out of range in the RDI
- HTCU01BCE1E3Error codeReserved for future - 10
- HTCU01BCE1E5Error codeShort to Ground in the RDI Wakeup pin
- HTCU01BCE1ECError codeisolation monitoring fault
- HTCU01BDE0E0Error codeHigh detected in the pressure sensor of Tank 8
- HTCU01BDE0E2Error codeFC Contactor Enable Status from HVPN signal is not available
- HTCU01BDE0E4Error codePressure sensor reference under voltage Tank 1