Kawasaki endüstriyel All models error codes
Codes
- E6527Error codeLaser sensor communication error. Code is XX
- E6528Error codeStart point not found by Laser sensor
- E6529Error codeFinish point not found by Laser sensor
- E6530Error codeCannot use circular interp. with Laser sensor function
- E6531Error codeCannot turn Laser ON because motor power is OFF
- E6532Error codeNo communication board to Laser sensor
- E6535Error codeRTPM arc sensor error
- E6536Error codeRTPM current deviation error
- E6542Error codeAVC voltage deviation error
- E6549Error codeHyper Arc torch calibration error
- E6550Error codeHyper Arc Z phase index error
- E6552Error codeHyper Arc board error. Code is XX
- E6553Error codeHyper Arc current sensor error
- E6554Error codeHyper Arc voltage sensor error
- E6555Error codeHyper Arc current deviation error
- E6556Error codeHyper Arc amplifier error. Code is XX
- E6558Error codeWire feeding control error, code is XX
- E6559Error codeWire feeding speed deviation error
- E6563Error codeKHITS tracking system error. (Code = XX)
- E6567Error codeKLS tracking system error.(Code=XX)
- E6573Error codeThe welding machine is abnormal.(Code=XX)
- E6575Error codeSensing of groove: gap error
- E7009Error codeCurrent limit for servo welding gun is abnormal
- E7502Error codeAC Fail Process Error = XX
- E7510Error codeCannot move with current posture
- E8401Error codeClamping position of servo Hand is error.(CLAMP=XX)
- E8600Error code（FSJ)Processing condition error.XX
- E8604Error codePressure cable disconnected
- E8605Error codePlease input two set pressure or more
- E8607Error codeFSJ COUNTER ALARM.XX
- E8608Error code(FSJ)FSJ schedule setting data is abnormal
- E8820Error codeCurrent value exceeded virtual safety fence.(SphereXX, LineXX)
- E8821Error codeCurrent value exceeded virtual safety fence.(SphereXX, ZUpper)
- E8822Error codeCurrent value exceeded virtual safety fence.(SphereXX, ZLower)
- E8823Error codeCurrent value invaded restricted space.(SphereXX, Part.XX LineXX)
- E8824Error codeCurrent value invaded restricted space.(SphereXX, Part.XX ZUpper)
- E8825Error codeCurrent value invaded restricted space.(SphereXX, Part.XX ZLower)
- E8826Error codeCurrent value exceeded virtual safety fence.(ToolBox, LineXX)
- E8827Error codeCurrent value exceeded virtual safety fence.(ToolBox, ZUpper)
- E8828Error codeCurrent value exceeded virtual safety fence.(ToolBox, ZLower)
- E8829Error codeCurrent value invaded restricted space.(ToolBox, Part.XX)
- E8830Error codeCurrent value exceeded virtual safety fence.(LinkXX, LineXX)
- E8831Error codeCurrent value exceeded virtual safety fence.(LinkXX, ZUpper)
- E8832Error codeCurrent value exceeded virtual safety fence.(LinkXX, ZLower)
- E8833Error codeCurrent value invaded restricted space.(LinkXX, Part.XX LineXX)
- E8834Error codeCurrent value invaded restricted space.(LinkXX, Part.XX ZUpper)
- E8835Error codeCurrent value invaded restricted space.(LinkXX, Part.XX ZLower)
- E8856Error codeCommunication error between interference check board and ARM CONTROL board
- E8861Error codeCommunication error between IL server and ARM CONTROL board
- E8900Error codeDetected torque for load presence is abnormal