Hyosung All models error codes
Codes
- M2226Error code[CHK EJECTION] S3 Sensor On Detection Failed, ALU part Jammed while Rejecting process
- M2227Error code[CHK EJECTION] S3 Sensor Off Detection Failed, Insertion Slot Jammed while Rejecting process
- M2228Error code[CHK EJECTION] S1 Sensor On Detection Failed while Rejecting process
- M2229Error code[CHK EJECTION] S1 Sensor Off Detection Failed while Rejecting process
- M2232Error codeCHK S6 Sensor On Detection Failed while Retaining process
- M2233Error codeCHK S9 Sensor On Detection Failed while Retaining process
- M2234Error codeCHK S12 Sensor On Detection Failed while Retaining process
- M2235Error codeCHK S12 Sensor Off Detection Failed while Retaining process
- M2300Error codeCHK Process Error related to M3 Motor( Printer part )
- M2900Error codeCHK Process Error related to Solenoid
- M2910Error codeCHK Process Error related to Solenoid 1
- M2920Error codeCHK Solenoid 2 Error
- M2922Error codeCHK Process Error related to Solenoid 2
- M3101Error codeCHK BOX is Abnormal Position
- M4000Error codeCHK Process Error
- M4101Error codeCHK Process Error. Document not inserted
- M4105Error codeCHK Process Error when a Check is inserted and removed at CheckStart
- M4201Error codeCHK Process Error. Auto Alignment Failed while Shading
- M4202Error codeCHK Process Error. S10 On Detection Failed while Shading
- M4203Error codeCHK Process Error. S9, S10 On Detection Failed while Shading
- M5000Error codeAbnormal Check was inserted
- M5102Error codeAn Abnormal Check having long length was inserted
- M5103Error codeAn Abnormal Check having short length was inserted
- M5104Error codeAn Abnormal Check having short width was inserted
- NCE00Error codeSurcharge Cancel
- P0002Error codeDeposit Timeout
- P0003Error codeInvalid Deposit
- P0004Error codeDeposit Cancelled
- T1001Error codeDatabase Access Error
- t5000Error codeError of Half Test() (=> Sensors have some problem(e.g. Dust)) (Envelope Depository)
- T5001Error codeError of Stacking (Timeout between S3 and S4)
- T5002Error codeError of Inserting (No envelope after executing insert)
- t5002BError codeError of Inserting (Firmware Version: supported above the V00.00.15) (Envelope Depository)
- T5003Error codeError of Rejecting (Shutter is closed after calling reject)
- T5004Error codeError of Closing shutter (Jam or mecha error)
- t5005Error codeError Shutter open(When Idle ) (Envelope Depository)
- T5006Error codeCheck sum error (Envelope Depository)
- T5007Error codePrint data error(char > 90)
- T5008Error codeError of the OpenHeader (mecha error)
- T5009Error codeError of the OpenHeader (mecha error)
- T5010Error codeError of printer header close when it sends 'F' command
- T5011Error codeError of Shutter open
- t5012Error codeDetecting the envelope in transport path between S3 and S4 sensor (Envelope Depository)
- t5013Error codeEDU cassette full error when 0x12 command, combined entry command, is performed
- t5013aError codeEDU cassette shutter open error when 0x12 command, combined entry command, is performed
- t5014Error codeCommand error at EDU when 0x15 command, combined print command, is performed. Character length equals 90 characters or more
- t5015Error codePrinter head close error at EDU when 0x13 command, combined open cancel command, is performed
- W0001Error codeWebRMS failed to dial into the ATM
- W0004Error codeThe ATM time, as set in the Operator Function Menu, is incorrect
- W0005Error codeWebRMS coincidentally detected that the ATM was in Operator mode at the time the ATM was dialed into