Hitachi Tips give a special instruction that can error codes
Codes
- E62Error codeWhile in position control mode the position error (command minus actual) reached 1,000,000 pulses or more
- E69Error codeThe SJ-FB expansion card is not mounted properly or the card is faulty
- F001Error codeStandard default target frequency that deter- mines constant motor speed
- F202Error codeAcceleration (1) time setting, 2nd motor
- F203Error codeDeceleration (1) time setting, 2nd motor
- F302Error codeAcceleration (1) time setting, 3rd motor
- F303Error codeDeceleration (1) time setting, 3rd motor
- FA1Error codeON when output to motor is at the standard set frequency F001
- FA2Error codeON when output to motor is at or above the FA threshold 1 (C042) during accel
- FA3Error codeON when output to motor is at the FA threshold 1 (C042) during accel, or at C043 during decel
- FA4Error codeON when output to motor is at or above the FA threshold 2 (C045) during accel
- FA5Error codeON when output to motor is at the FA threshold 2 (C045) during accel, or at C046 during decel
- H001Error codeNRT
- H002Error codeMotor data selection, 1st motor
- H003Error codeMotor capacity, 1st motor
- H004Error codeMotor poles setting, 1st motor
- H005Error codeMotor speed constant, 1st motor
- H006Error codeMotor stabilization constant, 1st motor
- H020Error codeMotor constant R1, 1st motor
- H021Error codeMotor constant R2, 1st motor
- H022Error codeMotor constant L, 1st motor
- H023Error codeMotor constant I , 1st motor 0
- H024Error codeMotor Constant J, 1st motor
- H030Error codeAuto-tuned motor constant R1, 1st motor
- H031Error codeAuto-tuned motor constant R2, 1st motor
- H032Error codeAuto-tuned motor constant L, 1st motor
- H033Error codeAuto-tuned motor constant I , 1st motor 0
- H034Error codeAuto-tuned motor constant J, 1st motor
- H050Error codePI proportional gain for 1st motor
- H051Error codePI integral gain for 1st motor
- H052Error codeP proportional gain setting for 1st motor
- H060Error code0Hz SLV limit for 1st motor
- H061Error code0Hz SLV starting boost current for 1st motor
- H202Error codeMotor data selection, 2nd motor
- H203Error codeMotor capacity, 2nd motor
- H204Error codeMotor poles setting, 2nd motor
- H205Error codeMotor speed constant, 2nd motor
- H206Error codeMotor stabilization constant, 2nd motor
- H220Error codeMotor constant R1, 2nd motor
- H221Error codeMotor constant R2, 2nd motor
- H222Error codeMotor constant L, 2nd motor
- H223Error codeMotor constant I , 2nd motor 0
- H224Error codeMotor constant J, 2nd motor
- H230Error codeAuto-tuned motor constant R1, 2nd motor
- H231Error codeAuto-tuned motor constant R2, 2nd motor
- H232Error codeAuto-tuned motor constant L, 2nd motor
- H233Error codeAuto-tuned motor constant I , 2nd motor 0
- H234Error codeAuto constant J, 2nd motor
- H250Error codePI proportional gain for 2nd motor
- H251Error codePI integral gain for 2nd motor