Hamilton Medical All models error codes
Codes
- SA6110Error codeSchematic diagram, alarm lamp board
- SA6111Error codeSchematic diagram, sensor probe adapter board
- SPR11Error codeGroup 1
- TC1Error code1. 2. 3. 4. Select Mixer on/off to turn mixer on. 5.
- TC2Error codeFor example, if pressure gauge = 80 mbar, Ppat = 76-84 mbar
- TC3Error codeVerify that dP flow sensor is reading correctly
- TC4Error codeVerify that dP flow sensor is reading correctly
- TC5Error code1. 2.
- ter80Error code
- TF55xError codeThe GCP LED is red (emergency status) and the LCD display shows a technical fault of type TF 55xx
- TI1Error codeTime to deliver the required gas (time to reach the operator-set Vt or Pcontrol value). Applies to mandatory breaths, if the ventilator is so configured. The high limit on the TI value is 10 sec- onds. This is due to a safety algorithm ensuring a minimum exhalation phase
- to100Error code
- TP22Error codeControl Signal Ambient Valve
- vel161Error codeSound pressure level161
- Vol45Error codePercentage of minute volume to be delivered in ASV mode. The ventilator uses the %MinVol, Pat. height, and sex settings to calculate the target minute ventilation. Add 20% per degree of body temperature > 38.5°C (101.3°F)
- WD6160Error codeWiring diagram, ventilation unit (VU)