Canon All models error codes
Codes
- E808-0000Error codeAlçak Gerilim Güç Kaynağı (LVPS) Voltaj Çökme Hatası. Power supply kartında kısa devre veya kondansatör patlaması mevcuttur; Motor Kontrol PCB'si koruma moduna geçer
- E840-0000Error codeFuser Basınç Tahliye ve Kam Grubu Konum Hatası. Baskı silindirlerini sıkıştıran veya gevşeten mekanik kam mekanizmasının sensör konum algısı bozulmuştur
- G2Error code• Make the correct tone/pulse setting. • When registering an auto-dial number, put a relatively long pause after the telephone number to delay the T0 timer start mechanism. • To prevent a time-over condition, increase the T0 timer setting*4. (for transmission) • To prevent a time-over condition, increase the T1 timer setting*5. (for reception). • Contact the operator of the other party, and find out the cause. • The communication mode depends on each specific model, and no remedy can be offered. • Check to find out that a subscription has been signed for F-NET; then, inform the telephone company of that the line is out of order. • Provide echo remedy 1*7. • Using a manual call, press the Start button after hearing the 1st DIS from the other party. • To prevent response to the 1st DIS from the other party, put a relatively long pause to the telephone number when registering an auto-dial number. • Ask the operator of the other party to pro- vide echo remedy 2*7. • Ask the operator of the other party to de- crease the transmission level*1. • Provide echo remedy 2*7. • Start MF1 mode, and transmit once again
- G4Error code• Check to make user that the document is placed correctly. • If the feeding roller is worn, replace it. • If any image received in memory recep- tion remains in the memory, print out the image and empty the memory. Also, avoid leaving a document in the document tray unless the machine is in transmission mode. • Record the protocol on a DAT or MD, and have it analyzed by the local Canon office and/or Technical Center. • Start over the communication. • Print out a communications analysis list for analysis
- hin10Error code• Replace the system control board. • Replace the PCB that includes the modem
- P02Error codeP02 (5100)
- P10Error codeP10 (B200 / B203 / B204)
- SPR11Error codeSınıf A
- WiError codeFi ve ağ bağlantısı sorunları
- XC-20LError codeKart boyutlu çıkartma kağıdı