Bmw All models error codes
Codes
- P90Error code1
- P2096Error codeIncorrect formation of the air-fuel mixture and a malfunction in the fuel balance system. In practice, this problem is usually associated with malfunctions in the oxygen and mass air flow controllers. In the first bank of the engine, a lean combustible mixture is observed
- P2626Error codeMalfunction of the heated oxygen controller number 1 installed in the first bank of the engine. The problem may be an incorrect pump current and a break in the power and control lines
- P2731Error codeTransmission fluid pressure control solenoid valve F malfunction.
- P2779Error codeMalfunctions in the operation of the gear selector (selector). The signal coming from the device is outside the allowable normalized range. A detailed check of the quality of connection and communication is required
- P3263Error codeMalfunctions of the mass air flow sensor
- P3264Error codeIf this does not help, the device is changed
- R1351Error codeMisfire of the air-fuel mixture in the fifth cylinder of the engine with fuel cut-off. Reasons that could lead to this problem: No spark at spark plug. Such a problem can manifest itself as a result of wear on the device, contamination of the electrode, or its malfunction. Also, the absence of a spark appears when the switchgear fails or the armored wire connected to the candle is damaged. The lid on the distributor could crack, which led to moisture getting inside. Lack of fuel in the combustible mixture. This problem is manifested as a result of clogging or failure of the nozzle. The reason may be insufficient fuel pressure, which is associated with a clogged filter or a failure of the pressure sensor. The latter could wear out and leak. The problem may be a broken exhaust valve or damage to the gasket located in the cylinder head. This leads to a decrease in the level of compression as a result of fuel leakage or its non-combustion
- R2766Error codeCombination 2766 appears when the input shaft speed controller fails. Also, this code can report a malfunction of the turbine shaft speed controller B. The signals from the sensors are outside the allowable normalized ranges
- R2870Error codeStop adaptation of the Vanos systemassociated with a change in valve timing
- R6252Error codeÁÁÁÁÁÁÁÁÁÁÁÁÁ THROTTLE POSITION SENSOR . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- R6255zError codeTHROTTLE POSITION SENSOR (ASC) . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- S29Error codeBRAKE LIGHT SWITCH . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- S30Error codeBRAKE LIGHT SWITCH . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- S36yError codeÇİFT SICAKLIK ANAHTARI . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁ
- S38Error codeTILT/SLIDE SUNROOF SWITCH (SHD) . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- S77Error codeDRIVER’S MAKE-UP MIRROR SWITCH . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- S78Error codePASSENGER’S MAKE-UP MIRROR ÁÁÁÁÁÁÁÁÁÁÁÁÁ SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- S123Error codeABS PEDAL TRAVEL SENSOR . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- U0001Error codeAğ İletişimi
- U0100Error codeECU İletişim Hatası
- ure-5Error code
- X82Error code(3 PINS, BLACK) . . . . . . . . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- X382Error code(3 PINS, BLACK) . . . . . . . . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- X1245Error code(1 PIN, BLACK) . . . . . . . . . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- X1246Error code(1 PIN, BLACK) . . . . . . . . . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- X1715Error code(4 PINS, NATURAL) . . . . . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ
- X6209Error codeÁÁÁÁÁÁÁÁÁÁÁÁÁ (3 PINS, BLACK) . . . . . . . . . . . . . . . . . . . . . . . . ÁÁÁÁÁÁÁÁÁÁÁÁÁ