Error code

Benchmark Games arcade oyun makinesi All models code E11

No approved translation for this record yet; showing the original text.

Meaning

As per section 4-> Balloon reload the balloon carousel system has a switch by the motor to let it know it the valve is aligned to the balloon stems. If for any reason, the main CPU is unable to see the signal from this switch as the motor rotates the carouse. This Error will show up. >If the solenoid air-valve fails to activate when attempting to cycle to a new balloon, the machine won’t be able to rotate the wheel and the switch won’t be seen. Confirm proper activation and alignment of solenoid assembly mechanism. >Check continuity between the switch and the main CPU board input (J3-2 and J3-11 for players 1 and 2 respectively). This is easily accomplished by manually rotating the motor (with the game off) until it keeps the switch depressed, and then checking continuity between the the corresponding board input and dc ground. If you have a helper, he can press the switch intermittently to better confirm the connection. >If the connection is OK, try ruling out the main pcb board (an input may have gone bad), by swapping it with known-good unit. When in this condition, the game usually re-attempts every 5 minutes, but it is easier to reboot the machine to check your solution right

Member details

Signed-in members see the LED pattern and how to read the code with the remote control on eligible records.

View details as a member

Solution

Solution steps are available to members and are not shown on this page. Answer the questions to open the solution.

Remote technician support

Get help from a technician over a video call.

Send a message Voice call Video call