Ado elektrikli bisiklet All models error codes
Codes
- 7xError codeGears
- 61Error codeAbnormal voltage in U-phase current sensor while motor is off
- 62Error codeOvercurrent applied in U-phase motor
- 63Error codeError in reading data
- 64Error codeDetected temperature of the PCB is too low (-20 degrees)
- 66Error codeExternal memory data error
- 67Error code2 connection cables are disconnected
- 68Error codeNot connected or guide cable has a short circuit
- 71Error codeBattery data could not be correctly received
- 73Error codeDetected battery voltage is too high (45V)
- 79Error codeAbnormal direct current
- 592Error codeIncompatible component
- 593Error codeConfiguration error
- 595Error codeCommunication error
- 602Error codeInternal battery error while charging
- 603Error codeInternal battery error
- 605Error codeBattery temperature error
- 606Error codeExternal battery error
- 610Error codeBattery voltage error
- 620Error codeCharger error
- 640Error codeInternal battery error
- 655Error codeMultiple battery errors
- 656Error codeSoftware version error
- E010Error codeA system error was detected
- E014Error codeThe speed sensor may have been installed in the wrong position
- E020Error codeA communication error between the battery and drive unit was detected
- E023Error codeElectric failure inside the battery
- E024Error codeCommunication error with the bike system
- E033Error codeThe current firmware is not compatible with this system
- E6100TError codeHave you used the bike computer in, or exposed it to, low temperatures for an extended period?
- W010Error codeThe drive unit temperature is higher than the temperature during normal operation
- W011Error codeThe traveling speed cannot be detected
- W013Error codeTorque sensor initialization was not completed successfully
- W020Error codeIf the temperature exceeds the guaranteed operating range, the battery output is turned off