Case IH All models error codes
Codes
- 4183Error codeTimer No.3 / No.4 not connected
- 4184Error codeEHR Joystick potentiometer X open circuit
- 4185Error codeShort circuit of the X potentiometer of the EHR joystick
- 4186Error codeEHR Joystick Y potentiometer open
- 4187Error codeShort circuit of the Y potentiometer of the EHR joystick
- 4190Error codeNo messages from (EHR) #1
- 4191Error codeNo messages from (EHR) #2
- 4192Error codeNo messages from (EHR) #3
- 4193Error codeNo messages from (EHR) #4
- 4194Error codeEngine Mode Switch #1 Defective
- 4195Error codeEngine Mode Switch #2 Defective
- 4196Error codeEngine Mode Switch #3 Defective
- 4197Error codeEngine Mode Switch Malfunction #4
- 5001Error codeRear PTO solenoid jammed
- 5002Error codeRear PTO solenoid stuck on
- 5003Error codeRear PTO brake circuit open
- 5004Error codeRear PTO brake overheating (not used)
- 5005Error codeBrake switch, open circuit
- 5007Error codeRear PTO solenoid jammed
- 5008Error codeOvercurrent in the rear PTO solenoid circuit
- 5024Error codeRear PTO not calibrated
- 5027Error codeRear PTO speed sensor circuit open (not implemented)
- 5033Error codeRear PTO in cab N/C switch open circuit
- 5034Error codeRear wing PTO switch open/short to ground
- 5035Error codeRear Wing PTO Switch Input Short to +12V
- 5037Error codeRear PTO switch in cab stuck closed
- 5038Error codePTO switches in cockpit and fender actuate in 2 seconds
- 5039Error codeIncorrect voltage on wing power take-off switch
- 5040Error codeRear wing PTO switches reversed (not used)
- 5041Error codePTO disabled due to false load (not in use)
- 5042Error codePTO control switch short circuit
- 5099Error codeAutomatic PTO not engaged
- 6020Error codeFWD New Switch Error
- 6021Error codeFWD solenoid stuck on
- 6023Error codeFWD Open circuit solenoid
- 7014Error codeDifferential lock switch error
- 7015Error codeDifferential lock solenoid stuck
- 7016Error codeDifferential Lock Solenoid Stuck On
- 7017Error codeOpen circuit differential lock solenoid
- 7018Error codeDifferential lock driver overheating
- 7024Error codeSteering angle sensor not calibrated
- 7031Error codeSteering Angle Sensor Out of Max Range
- 7032Error codeSteering angle sensor out of minimum range
- 8007Error codeFront PTO Solenoid Stuck On
- 8008Error codeFront PTO Solenoid Circuit Open
- 8024Error codeFront PTO not calibrated
- 8027Error codeFront PTO speed sensor circuit open
- 8033Error codeFront PTO switch in cab, break contact, open circuit
- 8036Error codeFront PTO won’t start
- 8037Error codeCab front PTO NO contact stuck closed