Case IH All models error codes
Codes
- 1408Error codeEngine oil pressure short circuit to 12 or 5 volts
- 1410Error codeAir brake pressure not set
- 1490Error codeMissing (DA/DB/DE/DF) transmission module
- 1500Error codeExceeding the safe operating wheel speed (10 km/h) with the system on or active. The error code is not active, instead the fast turn lamp flashes
- 1501Error codeEmergency Switch Failure
- 1502Error codeSystem not calibrated
- 2001Error code‘N’ - Shuttle too fast error
- 2002Error codeFlash N error
- 2003Error code‘CP’ - Clutch Pedal Required
- 2004Error code‘P’ - Handbrake Error
- 2005Error codeCreeper selection error
- 2011Error codeClutch Pedal Potentiometer Signal Too Low
- 2012Error codeClutch Pedal Potentiometer Signal Too High
- 2013Error codeUp and down buttons at the same time
- 2014Error codeSwitch 4/5 error (not used)
- 2015Error codeHI/LO shift lever switches both closed
- 2016Error codeCreeper Solenoid Short Circuit
- 2021Error codeChassis Harness Error
- 2024Error codeSynchro clutch not calibrated
- 2035Error codeReset Solenoid Circuit Malfunction
- 2036Error codeReset solenoid open circuit
- 2037Error codeClutch Switch Circuit Open
- 2038Error codeShort circuit of the solenoid valve 4 clutch
- 2039Error codeClutch solenoid valve 4 open circuit
- 2040Error codeShort circuit of the clutch solenoid 3
- 2041Error codeClutch solenoid valve 3 open circuit
- 2042Error codeShort circuit of the clutch solenoid 2
- 2043Error codeClutch solenoid valve 2 open circuit
- 2044Error codeShort circuit of the clutch solenoid 1
- 2045Error codeClutch solenoid valve 1 open circuit
- 2047Error codeClutch pedal switch set too high
- 2048Error codeClutch pedal switch set too low
- 2049Error codeWheel speed sensor shorted or open
- 2051Error codeOil temperature sensor open circuit
- 2052Error codeOil temperature sensor short circuit
- 2053Error code5 V potentiometer supply voltage too high
- 2054Error codePotentiometer supply voltage too low 5 V
- 2055Error codeNo signal from wheel speed sensor
- 2056Error codeLow range switch open
- 2057Error codeHigh range switch open
- 2058Error codeSeat switch shorted for 25 hours
- 2059Error codeLever Switch Disagree
- 2060Error codeSynchro Fwd no longer in use
- 2061Error codeF/R synchronizer potentiometer signal too high
- 2062Error codeF/R synchronizer potentiometer signal too low
- 2063Error codeSynchro not moving forward
- 2064Error codeSynchro won’t shift into reverse
- 2065Error codeForward Solenoid Circuit Open
- 2066Error codeReverse solenoid circuit open
- 2067Error codeForward Solenoid Circuit Malfunction