Zyxel access switch All models error codes
Codes
- 1-12Error codeSets the WTR (wait to restore) timer interval. WTR timer is the time interval that the traffic channel has to wait before re- blocking the RPL. After the conditions causing a switch have cleared, the traffic channel is prepared to restore to the working transport entity. If a defect is cleared, the traffic channel reverts after the WTR time expires. 1-12 minutes, default 5 minutes
- 1-100Error codeSets the CPU utilization alarm threshold
- EEE802Error codeSelect Enable or Disable to activate or deactivate the IEEE802.1ag CFM (Connectivity Fault Management) specification, which allows network administrators to identify manage connection faults
- low74Error code
- md5Error codeSets the authentication level for SNMP v3 user authentication. Optionally, specifies the authentication and encryption methods for communication with the SNMP manager. name: Enter the SNMP username. noauth: Use the username as the password string sent to the SNMP manager. This is equivalent to the Get, Set and Trap Community in SNMP v2c. This is the lowest security level. auth: Implement an authentication algorithm for SNMP messages sent by this user. priv: Implement privacy settings and encryption for SNMP messages sent by this user. This is the highest security level. auth-password: Set the authentication password for SNMP messages sent by this user. priv-password: Set the privacy settings password for SNMP messages sent by this user. group: Set the View-based Access Control Model (VACM) group. Available group names are: admin: The user belongs to the admin group and has maximum access rights to the OLT. readwrite: The user can read and configure the OLT except for confidential options (such as user account and AAA configuration options.) readonly: The user can read but cannot make any configuration changes. Note: The settings on the SNMP manager must be set at the same security
- v2cError codeSets the SNMP version to use for communication with the SNMP manager. v2c: allows SNMPv2 read/write access. v3: allows SNMPv3 read/write access. v3v2c: allows SNMPv2 and SNMPv3 read/write access