Yokogawa güç kalitesi analizörü All models error codes
Codes
- An2Error codeNeutral line current
- DC1Error codeAnalog input channel 1 voltage
- Er-03Error codeIf sensor1 is set as PV, the burnout value is output. When sensor backup mode is set in YTA320, sensor2 input is used as output
- Er-04Error codeIf sensor2 is set as PV, or sensor backup mode is in effect, sensor burnout value is output
- Er-05Error codeOutput goes to minimum value(-2.0%) or maximum value(105%)
- Er-06Error codeOutput goes to minimum value(-2.0%) or maximum value(105%)
- Er-07Error codeContinues to operate and output
- Er-08Error codeContinues to operate and output
- Er-09Error codeSensor2 input is used as output. If sensor2 also fails, the transmitter operate with burnout settings
- Er-10Error codeOutput status immediately before error is retained (HOLD)
- Er-11Error codeOperation and output continues
- Er-12Error codeThe output goes to the value set by the hardware failure mode jumper
- Er-13Error codeThe output goes to the value set by the hardware failure mode jumper
- Er-14Error codeThe output goes to the value set by the hardware failure mode jumper
- Er-15Error codeThe output goes to the value set by the hardware failure mode jumper
- V1Error codePhase voltage
- YTA110Error codeTemperature transmitter (1 input type) High precision temperature transmitter (1 input type) High precision temperature transmitter (2 input type)
- YTA310Error code4 to 20mA DC output, BRAIN communication type 4 to 20mA DC output, HART communication type FOUNDATION Fieldbus communication type (YTA320 only)