Yaskawa All models error codes
Codes
- U4-23Error codeCommunication Option Card Reference
- U6-01Error codeDisplays the value of the motor secondary current (Iq)
- U6-02Error codeDisplays the value calculated for the motor excitation current (Id)
- U6-07Error codeDisplays the current control (ACR) output of for the motor secondary current (Iq)
- U6-08Error codeDisplays the current control (ACR) output of for the motor excitation current (Id)
- U9Error codeKEB Voltage Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235
- U9-01Error codeDC bus voltage when KEB was triggered
- U9-02Error codeDC bus voltage at the end of KEB
- U9-03Error codeDisplays a 5 digit number if the DC bus voltage exceeds the drive's internal voltage limit at the start or end of KEB. If the first is “1”, then the voltage setting at the start of KEB exceeded the 150 - 400 V internal limit. If the second digit is "1", then the voltage setting at the end of KEB exceeded the the internal limit of 150 - 400 V
- UL3Error codeThe current has fallen below the minimum value set for torque detection (L6-02) for longer than the allowable time (L6-03)
- UVError codeUndervoltage
- Uv1Error codeDC Düúük Gerilim Uv1
- Uv2Error codeKontrol Birimi Düúük Gerilimi Uv2
- Uv3Error codeDC ùarj Devresi Hatası Uv3