Yaskawa SGD7C error codes
Codes
- B10Error codeSpeed Reference A/D Error
- B11Error codeSpeed Reference A/D Data Error
- B20Error codeTorque Reference A/D Error
- B31Error codeCurrent Detection Error 1
- B32Error codeCurrent Detection Error 2
- b33Error codeAn error occurred in the current detection cir- cuit
- bF0Error codeInternal program error 0 occurred in the SER- VOPACK
- bF1Error codeInternal program error 1 occurred in the SER- VOPACK
- bF2Error codeInternal program error 2 occurred in the SER- VOPACK
- bF3Error codeInternal program error 3 occurred in the SER- VOPACK
- bF4Error codeInternal program error 4 occurred in the SER- VOPACK
- bF5Error codeInternal program error 5 occurred in the SER- VOPACK
- bF6Error codeInternal program error 6 occurred in the SER- VOPACK
- bF7Error codeInternal program error 7 occurred in the SER- VOPACK
- bF8Error codeInternal program error 8 occurred in the SER- VOPACK
- Bit10Error codeSERVOPACK Synchronized Communications Error
- Bit11Error codeSERVOPACK Communications Error
- Bit12Error codeSERVOPACK Communications Timeout Error
- Bit16Error codeScan Setting Error
- C0Error codeRegister type error
- C1Error codeData type error
- C2Error codeLocal register type error
- C10Error codeThe order of phases U, V, and W in the motor wiring is not correct
- C20Error codeThe count-up direc- tion of the linear encoder does not match the forward direction of the Mov- ing Coil in the motor
- C21Error codeAn error occurred in the polarity sensor
- C50Error codeAn external force was applied to the Moving Coil of the motor
- C54Error codeAn external force was applied to the Servo- motor
- C90Error codeCommunications between the encoder and SERVOPACK is not possible
- C91Error codeAn error occurred in calculating the position data of the encoder
- C92Error codeAn error occurred in the communications timer between the encoder and SERVOPACK
- CA001Error codeOperation Error in DWG.A
- CA002Error codeOperation Error in DWG.I
- CA003Error codeOperation Error in DWG.H
- CA005Error codeOperation Error in DWG.L
- CA30AError codeSave File Reading Error
- CA30BError codeNo USB Memory Device Error
- CA101Error codeI/O Error on Rack 1
- CA230Error codeHardware Error 4
- CA241Error codeInternal Temperature Rise Detected
- CA242Error codeEDLC Voltage Error
- CA301Error codeUSB Writing Error
- CA302Error codeUSB Reading Error
- CA303Error codeSecurity Error
- CA304Error codeUser Program Memory Diagnosis Error
- CA306Error codeLoad File-Model Inconsistency Error
- CA307Error codeLoad Error for Load Prohibition (Program
- CA308Error codeLoad File Writing Error
- CA309Error codeFlash Memory Save Error
- CA370Error codeLogging Folder Creation Error
- CA371Error codeLogging File Creation Error