Xinje VFD-manual VFD-manual error codes
Codes
- AD-04Error codeAI2 measured voltage 1
- AD-05Error codeAI2 display voltage 1
- AD-06Error codeAI2 measured voltage 2
- AD-07Error codeAI2 display voltage 2
- AD-12Error codeAO1 target voltage 1
- AD-13Error codeAO1 measured voltage 1
- AD-14Error codeAO1 target voltage 2
- AD-15Error codeAO1 measured voltage 2
- AI1Error codeVoltage 0～10V Current 0～20mA
- AO1Error codeVoltage 0～10V Current 0～20mA
- is3Error codeDuring rapid acceleration, there is a high possibility of motor stall. This can be achieved by adjusting the P5-22 overcurrent stall action current compensation coefficient to a set value of 100%
- P0-01Error codeFirst motor control mode
- P0-02Error coderun command channel selection
- P0-03Error codeMain frequency source A channel selection
- P0-04Error codeMain frequency source A channel selection
- P0-14Error codeUpper limit frequency source
- P0-25Error codeMotor parameter group selection
- P1-00Error codeMotor type selection
- P1-01Error codeMotor rated power / voltage / current / frequency / speed
- P1-02Error codeMotor rated voltage
- P1-03Error codeMotor rated current
- P1-04Error codeMotor rated frequency
- P1-05Error codeMotor rated speed
- P1-06Error codeEquivalent stator resistance, inductance and rotor inductance of the motor
- P1-07Error codeAsynchronous motor rotor resistance
- P1-08Error codeAsynchronous motor leakage
- P1-09Error codeAsynchronous motor mutual inductance
- P1-10Error codeAsynchronous motor no load current
- P1-35Error codeMotor parameter self-learning
- P2Error code
- P2-00Error codeInput terminal X1 function selection
- P3-01Error codeY1 output function selection
- P3-12Error codeY1 (high speed pulse) output selection
- P3-13Error codeAO1 output selection
- P4-00Error codeStart mode
- P4-03Error codePercentage of starting DC braking current and pre-excitation current
- P4-10Error codeSpeed tracking closed loop current
- P4-25Error codePercentage of DC braking current when shutdown
- P5-02Error codeMultipoint VF voltage point V1
- P5-04Error codeMultipoint VF voltage point V2
- P5-05Error codeMultipoint VF frequency point F3
- P5-06Error codeMultipoint VF voltage
- P5-09Error codeVF separated voltage source
- P5-10Error codeVF separated voltage source digital setting
- P5-11Error codeVF separated voltage acceleration time
- P5-12Error codeVF separated voltage deceleration time
- P5-13Error codeVF separated stop mode selection
- P5-19Error codeVF over current stall action current
- P5-20Error codeVF over current stall suppression enable
- P5-21Error codeVF over current stall suppression gain