Xerox dijital baskı makinesi All models error codes
Codes
- 010-200Error codeThe detected value of the main heat roll sensor. Range: 0 to 1023
- 010-201Error codeThe detected value of the side heat roll sensor. Range: 0 to 1023
- 010-202Error codeEnvelope Mode Sensor Side AD
- 016-353Error codeIOT communication diagnostic has started
- 016-354Error codeIIT communication diagnostic has started
- 16-383Error codeOS communication diagnostic has started
- 016-749Error code• Verify the license string @PJL SET JOBATTR="@RSAP=<Pin code>" was copied to Notepad cor rectly. • Verify that the PIN code is correct. • When generating the code, make sure the current total meter read was used
- 042-001Error codeRuns the rear fan at normal speed
- 042-002Error codeRuns the Rear Fan at half-speed
- 042-003Error codeRuns the LVPS Fan at half-speed
- 042-200Error codeRear Fan Alarm
- 042-201Error codeLVPS Fan Alarm
- 046-200Error codeThe supplied current to the Bias Transfer Roll. Range: 0 to 1023
- 061-001Error codeRuns the ROS motor
- 071-001Error codeRuns the Main Drive Motor at nor mal speed
- 071-002Error codeRuns the Main Drive Motor at nor mal speed
- 071-003Error codeRuns the Main Drive Motor at low speed
- 071-009Error codeRuns the Option Feeder 1 Motor at normal speed
- 071-010Error codeRuns the Option Feeder 1 Motor at half speed
- 071-011Error codeRuns the Option Feeder 1 Motor at slow speed
- 071-012Error codeRuns the Option Feeder 2 Motor at normal speed
- 071-013Error codeRuns the Option Feeder 2 Motor at half speed
- 071-014Error codeRuns the Option Feeder 2 Motor at slow speed
- 071-015Error codeRuns the Option Feeder 3 Motor at normal speed
- 071-016Error codeRuns the Option Feeder 3 Motor at half speed
- 071-017Error codeRuns the Option Feeder 3 Motor at slow speed
- 071-100Error codeMSI No Paper Sensor
- 071-101Error codeTray 1 No Paper Sensor
- 071-102Error codeRegistration Sensor
- 071-103Error codeExit Sensor
- 071-116Error codeOption Feeder No Paper Sensor 1
- 071-117Error codeOption Feeder No Paper Sensor 2
- 071-118Error codeOption Feeder No Paper Sensor 3
- 071-119Error codeOption Feeder Path Sensor 1
- 071-120Error codeOption Feeder Path Sensor 2
- 071-121Error codeOption Feeder Path Sensor 3
- 071-122Error codeFull Stack Sensor
- 071-200Error codeOption Feeder Motor Alarm 1
- 071-201Error codeOption Feeder Motor Alarm 2
- 071-202Error codeOption Feeder Motor Alarm 3
- 091-200Error codeThe temperature value of the environment sensor. Range: 0 to 1023
- 091-201Error codeThe humidity value of the environment sensor. Range: 0 to 255
- 092-200Error codeDisplays the detected value of the ATC sensor. Range: 0 to 1023
- 093-001Error codeRuns the Toner Dispenser Motor at normal speed
- 093-002Error codeRuns the Toner Dispenser Motor at half speed
- 117-319Error codeSD Card driver error
- RS-232Error code