Western Digital depolama sistemi san nas All models error codes
Codes
- 0Error codeSet the read and write error recovery time
- 00BError codeOptional
- 00DError codeOptional
- 00FError codeOptional
- 0000hError codeCommand complete without error
- 1Error codeReturn Current Value
- 0001hError code0001h : Allow write cache operation to be determined by Set Feature command 0002h : Force write cache enabled 0003h : Force write cache disabled If State 0001h is selected, the ATA Set Feature command will determine the operation state of write cache. If State 0002h or 0003h is selected, write cache will be forced into the corresponding operation state, regardless of the current ATA Set Feature state. Any attempt to change the write cache setting through Set Feature shall be accepted, but otherwise ignored, and not affect the operation state of write cache and complete normally without reporting an error. In all cases, bit 5 of word 85 in the Identify Device information will reflect the true operation state of write cache, one indicating enabled and zero indicating disabled. The default state is 0001h
- 001hError codeMandatory
- 01hError codeNo error Detected
- 1sError code1st error log data structure
- 2Error code
- 0002hError code0001h : Enable Write Cache Reordering 0002h : Disable Write Cache Reordering The default state is 0001h. The drive does not return error for setting state 0002h, but the state is ignored
- 02hError codeFormatter device error
- 2nError code2nd error log data structure
- 3Error codeAbsolute HDA Temperature sampling period in minutes. 0000h indicates sampling is disabled
- 0003hError codeError Recovery Control
- 03hError codeSector buffer error
- 3rError code3rd error log data structure
- 0004hError codeInvalid Function code in Error Recovery command
- 04hError codeECC circuitry error
- 0005hError codeInvalid Selection code in Error Recovery command
- 05hError codeController microprocessor error
- 0009hError codeBackground SCT command was terminated because of unrecoverable error
- 010hError codeOptional
- 10hError codeNCQ Command Error log
- 012hError codeOptional
- 013hError codeOptional
- 15Error codeError log index (15:8)
- 0015hError codeThe most recent non-SCT command returned command completion with an error due to the SCT Error Recovery Control Read Command Timer or SCT Error Recovery Control Write Command Timer expiring
- 16Error codeQWord
- 17Error codeAction code of last SCT command issued. If the Extended Status Code is FFFFh, this is the Action Code of the command that is current executing
- 0017hError codeBlocking SCT Write Same command was terminated because of unrecoverable error
- 18Error codeFinal LBA In Error(15:8)
- 19Error codeFunction code of last SCT command issued. If the Extended Status Code is FFFFh, this is the Function Code of the command that is current executing
- 20Error codeFinal LBA In Error(31:24)
- 21Error codeFinal LBA In Error(39:32)
- 22Error codeFinal LBA In Error(47:40)
- 23Error codeBit Meaning 63 Contents of the QWord are valid 62 LOGICAL TO PHYSICAL SECTOR RELATIONSHIP SUPPORTED bit 61 LOGICAL SECTOR SIZE SUPPORTED bit 60:22 Reserved 21:20 ALIGNMENT ERROR REPORTING field 19:16 LOGICAL TO PHYSICAL SECTOR RELATIONSHIP field 15:0 LOGICAL SECTOR OFFSET field
- 31Error codeTime in Over-Temperature (DWord)
- 33Error codeLast updated entry in queue. Queue Index is zero-based, so Queue Index 0000h is the first location in the buffer (at offset 34). The most recent temperature entered in the buffer is at Queue Index + 34. See Note 1 and Note 2
- 176-205Error codeCurrent media serial number (0000H=Not supported)
- 200Error codeCurrent HDA temperature in degrees Celsius. This is a 2’s complement number. 80h indicates that this value is invalid
- 201Error codeMinimum HDA temperature in degrees Celsius. This is a 2’s complement integer. 80h indicates that this value is invalid
- 202Error codeMaximum HDA temperature in degrees Celsius. This is a 2’s complement number. 80h indicates that this value is invalid
- 203Error codeMinimum HDA temperature in degrees Celsius seen for the life of the device. This is a 2’s complement integer. 80h indicates that this value is invalid
- 204Error codeMaximum HDA temperature in degrees Celsius seen for the life of the drive. This is a 2’s complement number. 80h indicates that this value is invalid
- 206Error codeSCT Command set support 15-12 Vendor specific 11-6 Reserved 5 Action Code 5 (SCT Data Table) 1= Support 4 Action Code 4 (Features Control) 1= Support 3 Action Code 3 (Error Recovery Control) 1= Support 2 Action Code 2 (SCT Write Same) 1= Support 1 Action Code 1 (Long Sector Access) 0= Not Support 0 SCT Feature Set (includes SCT status) 1= Support
- 209Error codeNumber of temperature recording Intervals since the last power-on reset where the recorded temperature was greater than Max Op Limit. See table 93 for information about this Interval
- 213Error codeNumber of temperature recording Intervals since the last power-on reset where the recorded temperature was less than Min Op Limit. See table 93 for information about this Interval
- 220Error code15-8 (=0) Reserved 7-0 (=0) Write-Read-Verify feature set current mode(not supported)