Vertiv snmp izleme cihazı All models error codes
Codes
- as1Error codeA UPS internal fault has occurred. There are two possible results: 1. 2. The load is no longer supplied by power
- as14Error codeThe UPS shut down automatically because short circuit occurs on the UPS output
- as27Error codeBattery voltage is too high or the charger is fault
- as28Error codeBattery voltage is too low or the charger is fault
- as43Error codeThe UPS shut down automatically because of overload at the UPS output
- uge32Error codeBit-wise logical OR of all of the 'lgpPduEntrySysStatus' columns in the 'lgpPduTable' which represents the combined statuses of all PDUs for this agent. Note the bit position is given parenthetically next to the operational state in the description below. The bit position is big-endian (least significant digit is the right-most digit). The state is present in the PDUwhen the bit is on (value =1). The value is a logical OR of all of the following potential states of each PDUin the cluster. normalOperation(1): One or more PDUs in the cluster are operating normally with no active warnings or alarms. startUp(2): One or more PDUs are in the startup state (initializing). Control and monitoring operations may be inhibited or unavailable while the PDUis in this state. unknownNoSupport(4): The state of one or more PDUs are not known at this time or there is no support for this piece of information from 1 or more PDUs in the cluster/group. normalWithWarning(8): One or more PDUs are operating normally with one or more active warnings. Appropriate personnel should investigate the warning(s)as soon as possible and take appropriate action. normalWithAlarm(16): One or more PDUs are operating norm
- x3Error codePressing this button 3 times within 2 seconds enables VLC mode. Pressing the button while VLC mode is active returns the unit to the standard current display