Danfoss VFD Tüm modeller arıza kodları
Kodlar
- 50-58Arıza koduAutomatic Motor Adaptation failures or drive reset. Alarm 80 means “Drive initialized” (parameters defaulted)
- AL2Arıza kodu
- AL4Arıza kodu
- AL7Arıza koduDrive DC bus voltage is too high (above limit). Often appears as “OVERVOLT”
- AL8Arıza koduDC bus voltage is too low (below limit). Drive trips
- AL9Arıza koduDrive is close to overloading. Usually a flashing alarm before trip
- AL10Arıza koduMotor temperature overload - often amber warning then trip
- AL12Arıza koduDrive output current hit programmed limit, shows as warning or trip “CURRENT LIMIT”
- AL13LED koduPeak current exceeded (trip). The drive’s output surged 200%+. Red LED blinks
- AL14Arıza kodu
- AL15Arıza koduNon-compatible option installed
- AL29Arıza koduPower board (heat sink) exceeded safe temp
- AL30Arıza kodu