Ancheer elektrikli bisiklet Tüm modeller arıza kodları
Kodlar
- 03Arıza koduLoose motor connector, bent pins, water/corrosion
- 04Arıza koduLoose torque sensor connector, misalignment after BB work
- 05Arıza koduSensor wiring issue (torque-sensor systems)
- 06Arıza koduShorted wiring, water in connectors, failed controller or motor
- 07Arıza koduBattery voltage too high for controller, wrong battery/controller pairing
- 08Arıza koduLoose motor connector, damaged harness, water ingress
- 09Arıza koduLoose phase connection, damaged motor cable, controller fault
- 10Arıza kodu
- 11Arıza kodu
- 12Arıza kodu
- 13Arıza koduBattery too hot/cold, temp sensor issue
- 14Arıza kodu
- 21Arıza koduMagnet misalignment, sensor gap, damaged sensor cable
- 22Arıza kodu
- 24Arıza koduSensor wiring issue or display/controller mismatch
- 25Arıza koduLoose connector, sensor fault, firmware mismatch
- 30Arıza koduDisplay/controller handshake failure, harness issue, damaged pins
- 500Arıza koduInternal drive fault
- 503Arıza koduMagnet misaligned, sensor gap wrong, damaged sensor wire
- 510Arıza koduSensor fault inside system
- 511Arıza koduInternal drive fault
- 530Arıza kodu
- 540Arıza koduDrive system outside temperature range
- 602Arıza kodu
- 603Arıza koduBattery internal fault
- 610Arıza koduBattery voltage out of expected range
- 620Arıza koduCharger fault / incompatible charger
- 655Arıza koduBattery seating/connection or internal faults
- E02Arıza koduStuck brake sensor / misadjusted lever / damaged brake cutoff wire
- E06Arıza koduLow charge, voltage sag under load, dirty battery contacts, weak battery pack
- E07Arıza koduLoose motor connector, pinched cable near axle, water in connector
- E09Arıza koduController protection event, overheated controller, internal failure
- E010Arıza kodu
- E12Arıza koduDirty battery cradle contacts, loose battery connection, BMS handshake failure
- E014Arıza koduSensor/magnet misalignment
- E023Arıza koduBattery internal fault
- W013Arıza koduPedal pressure during startup