Sigma saat su geçirmezlik test cihazı All models error codes
Codes
- 10-4Error codeOperating Conditions
- CN1-1Error codeAlarm Kodu Çıkışı için Sinyal Topraklaması
- CN1-25Error codePositioning is completed. (Position error is below the setting.)
- CN1-31Error codeServo Alarm Çıkışı
- CN1-32Error codeServo Alarm Çıkışı için Sinyal Topraklaması
- CN1-40Error codeTurns the servomotor OFF. The servo- motor is OFF and cannot operate (called the Servo OFF state). Do not turn the servomotor OFF while it is operating except in an emergency
- DC24NError codeConnected to ground. (For power ground and motor ground)
- Fn000Error codeAlarm traceback data display
- Fn00EError codeAutomatic offset-adjustment of motor current detection signal
- Fn00FError codeManual offset-adjustment of motor current detection signal
- Fn006Error codeAlarm traceback data clear
- Fn008Error codeAbsolute encoder multiturn reset and encoder alarm reset
- Fn011Error codeMotor models display
- Fn013Error codeMultiturn limit value setting change when a Multiturn Limit Disagree- ment alarm occurs
- L3CError codeConnected to ground. (For power ground and motor ground)
- Pn507Error codeSpeed Level for Brake Reference Output during Motor Operation
- Pn508Error codeTiming for Brake Reference Output during Motor Operation
- Un000Error codeActual motor speed
- Un008Error codeError counter value