Shimadzu röntgen cihazı All models error codes
Codes
- 24AError codeFailed to access to Analysis Server
- 24BError codeA Single Run of dual line can't be processed under the current instrument configuration
- 240AError codeStop batch processing. Do you want to stop data acquisition immediately? \n[Yes] Stop data acquisition now.\n[No] Wait until data acquisition is completed.\n[Cancel] Cancel batch stop
- 240DError codeFailed in QA/QC Processing
- 241AError codeThe system configuration for this method is different from the current instrument configuration._\nThe configuration in the method will be adapted to the current instrument configuration
- 242CError codeStop Single Run
- 242FError codeStop Startup Processing
- 243DError codeCurrent batch file will be saved to run batch processing
- 250EError codeAn error occurred when Peak Integration was performed
- 268AError codeSave current method file. Are you sure you want to continue?
- 270EError codeStop the baseline check
- 271CError codeData cannot be acquired from the instrument._\nIf the power supply is on in the instrument, it continues to acquire data._\nRestore the data may be available by rebooting this application after the instrument finishes acquiring data._\nWait for the instrument to finish acquiring data without turning Off
- 278AError codeCurrent parameters are transferred to all detectors
- 290AError codeAn error occurred while the system suitability test results were being output to HTML file
- 290BError codeAn error occurred while the system suitability test results were being output to text file
- 290CError codeAn error occurred when the system suitability test results were being displayed
- 290DError codeAn error occurred while the system suitability test results were being printed
- 2419Error code[Initialize Calibration Curve] is not specified at Standard Type setting. Do you specify [Initialize Calibration Curve]?
- 2420Error codeFailed to copy the report format file to data file
- 2426Error codeData acquisition on the %dth row was stopped
- 2432Error codeStop Shutdown Processing
- 2438Error codeStop Data Acquisition
- 2447Error codeThe batch processing execution information will be saved to the current batch file
- 2450Error codeThe xxth row has been performed according to the action setting
- 2519Error codeThe current parameters will be copied to all channels. \nDo you copy the time programs, too?
- 2591Error codeDistillation Data Analysis
- 2642Error codeChromatogram of specified channel does not exist in buffer
- 2643Error codeInvalid data format
- 2680Error codeSave current layout file?
- 2682Error codeSave current browsing file?
- 2688Error codeThe line of the specified data or method is not corresponding to the current line
- 2689Error codeThe instrument type of the specified data is not corresponding to the current instrument type
- 2702Error codeStartup was terminated with error
- 2703Error codeShutdown was terminated with error
- 2704Error codeAutoPurge was terminated with error
- 2705Error codeAn error occurred during download scan parameters to instrument
- 2706Error codeAn error occurred at start scanning
- 2707Error codeAn error occurred during scanning
- 2708Error codeAn error occurred at getting spectrum
- 2742Error codeStatus data is not correct
- 2783Error codeThe [Method View] will be returned from the Edit mode to the View mode. The current calibration curve will be deleted since the parameters for making the calibration curve were changed. Are you sure you want
- 2901Error codeAn error occurred during initialization of the system
- 2903Error codeAn error occurred when data was written to the work file of the system suitability
- 2904Error codeAn error occurred when data was read from the work file of the system suitability
- 2906Error codeAn error occurred when the summary calculation was performed
- 2907Error codeAn error occurred while the summary data was being
- 2908Error codeAn error occurred while the summary data was being output to file
- 2909Error codeAn error occurred while the system suitability test was being performed
- 2952Error codeControl sample peak was not identified. The current correction coefficient will be applied
- 2953Error codeCould not import data analysis parameters with another detector setting