Samsung All models error codes
Codes
- DZ903Error code32167-408-080 OIOOE-ZENER EQi\02-060/MTZ6.2B(TAR3)
- DZ905Error code32167-408-080 DIOOE-ZENER EQi\02-060/MTZ6.2B(TAR3)
- DZ906Error code32167-408-080 DIOOE-ZENER
- DZ907Error code32167-408-080 DIOOE-ZENER EQA.02-06D/MTZ6.2B(TAR3)
- DZ908Error code32167-408-080 OIOOE-ZENER
- E-0AError codeOven over heating error 3. Check whether DLB of sub PCB, Broil, Bake and
- E-02Error codeCooking Time Setting Over Error (Microwave)
- E-03Error codeCooking Time Setting Over Error (Grill)
- E-04Error codeCooking Time Setting Over Error (Convection)
- E-05Error codeCooking Time Setting Over Error (Combination)
- E-06Error codeSwing Heater Error
- E-08Error codeOven not heating error resistance of each.
- E-11Error code
- E-13Error codeT1 Max Time Gas Sensor Error
- E-14Error codeDry Up / No Load Gas Sensor Error
- E-22Error codeShort Temp Sensor Error
- E-23Error codeT1 Max Time Error
- E-24Error codeOver Temperature Error
- E-25Error codeMicro Cook Abnormal Temperature Error
- E-31Error code
- E-32Error code
- E-33Error codeUnder Weight Error
- E-34Error codeOver Weight Error
- E-35Error codeInvalid Weight Error
- E-36Error codeDoor Open Error
- E-42Error codeShort Easy/PH Sensor Error
- E-43Error codeT1 Max Time Easy/PH Sensor Error
- E-44Error codeDry Up Easy/PH Sensor Error
- E-45Error codeCooling Error
- E-47Error codeDoor Open Error
- E-149Error codeError due to AHU master indoor unit sensor setting
- E-201Error codeCommunication error between indoor and outdoor units (installation number setting error, repeated indoor unit address, indoor unit communication cable error)
- E-202Error codeCommunication error between indoor and outdoor units (Communication error on all indoor unit, outdoor unit communication cable error)
- E0Error codeDış ünite emniyet elemanı devrede hatası. Emniyet elemanlarını kontrol edin ve gerekirse değiştirin
- E4Error codeDış ünite alçak basınç swici devrede hatası. Alçak basınç anahtarını kontrol edin
- E27Error codeOven sensor opened(over 2950Ω) 2. If there is not any problem with oven sensor, Please check
- E28Error codeOven sensor shorted (Under 930Ω) whether there is a damaged terminal or wire on harness.
- E221Error codeOutside temperature sensor error (open/short)
- E237Error codeIndoor unit heat exchanger in temperature sensor error (open/short)
- E251Error codeCondenser temperature sensor error (open/short)
- E347Error codewire unconnected error
- E367Error code2 wire unconnected error
- E374Error codeer PBA2 IGBT temperature sensor error
- E399Error codePBA IPM temperature sensor error
- E416Error codeKompresör aşırı ısınma
- E447Error codewire unconnected error
- E458Error codeDış ünite fan motoru
- E461Error codeKompresör başlatma hatası
- E464Error codeİnverter modülü (IPM) aşırı akım koruması
- E467Error code1 wire unconnected error