Ryobi karavan jeneratörü All models error codes
Codes
- A0131Error code9. Fasten fan assembly and right side sheet metal cover with Phillips screws. 10. Land REbus wires on terminal block. 11. Connect battery string connector on top right side to BMU assembly. 12. Connect battery string connector into the DCB module where it was removed from. 13. Connect 12V battery positive lead
- B0131Error code4. Remove two Phillips screws (B) holding the left side of the fan assembly to the PWRcell Battery frame
- C0135Error code5. Disconnect the 2-pin connector (C) and (if equipped) 3-pin connector (D). 6. Pull fan assembly straight out
- oad32Error codeMax fault current duration (Current limit in overload 32 A rms)