Ricoh yazıcı All models error codes
Codes
- 0-01Error codeDCN received unexpectedly
- 0-1Error codeExtension access code (8 and 9) to turn V.8 protocol On/Off 0: On 1: Off
- 0-3Error codeTraining error detection threshold
- 0-04Error codeCFR or FTT not received after modem training
- 0-4Error codeTx level
- 0-05Error codeModem training fails even G3 shifts down to 2400 bps
- 0-06Error codeThe other terminal did not reply to DCS
- 0-07Error codeNo post-message response from the other end after a page was sent
- 0-7Error codeCountry/area code for functional settings (Hex)
- 0-08Error codeThe other end sent RTN or PIN after receiving a page, because there were too many errors
- 0-14Error codeNon-standard post message response code received
- 0-16Error codeCFR or FTT not detected after modem training in confidential or transfer mode
- 0-21Error codeEOL signal (end-of-line) from the other end not received within 5 s of the previous EOL signal
- 0-22Error codeThe signal from the other end was interrupted for more than the acceptable modem carrier drop time (default: 200 ms)
- 0-23Error codeToo many errors during reception
- 0-33Error codeThe data reception (not ECM) is not completed within 10 minutes
- 0-52Error codePolarity changed during communication
- 0-55Error codeFCU does not detect the SG3
- 0-56Error codeThe stored message data exceeds the capacity of the mailbox in the SG3
- 0-70Error codeThe communication mode
- 0-79Error codeThe called terminal detected CI while waiting for a V.21 signal
- 0-84Error codeThe line was disconnected due to abnormal signaling in V.34 phase 4 - control channel start-up
- 0-85Error codeThe line was disconnected due to abnormal signaling in V.34 control channel restart
- 0-86Error codeThe line was disconnected because the other terminal requested a data rate using MPh that was not available in the currently selected symbol rate
- 13-17Error codeSIP user name registration error
- 13-18Error codeSIP server access error
- 13-24Error codeSIP Authentication error
- 13-25Error codeNetwork I/F setting error
- 13-26Error codeNetwork I/F setting error at power on
- 13-27Error codeIP address setting error
- 14-00Error codeSMTP Send Error
- 14-08Error codeData Send to SMTP Server Failed (5XX)
- 14-14Error codeSecurity Locked File Error
- 14-15Error codeMail Data Error
- 14-16Error codeMaximum Division Number Error
- 14-17Error codeIncorrect Ticket
- 14-18Error codeAccess to MCS File Error
- 14-21Error codeSMIME Sending Error
- 14-30Error codeMCS File Creation Failed
- 14-31Error codeUFS File Creation Failed
- 14-32Error codeCancelled the Mail Due to Error Detected by NFAX
- 14-34Error codeAddress designated in the domain for SMTP sending does not exist
- 15-12Error codeAuthorization Error
- 15-14Error codeMail Header Format Error
- 15-15Error codeMail Divide Error
- 15-16Error codeMail Size Receive Error
- 15-31Error codeFinal Destination for Transfer Request Reception Format Error
- 15-39Error codeSend/Delivery Destination Error
- 15-41Error codeSMTP Receive Error
- 15-42Error codeOff Ramp Gateway Error