Pyronix alarm sistemi All models error codes
Codes
- een30Error codeTime period during which a second activation on a hold alarm must occur to qualify as ‘sequentially confirmed’ alarm. NOTE: BS8243 specifies a confirm time between 8 and 20 hours. This also can be used in conjunction with testing an omit signal
- eg0800Error codeCheck ALL call details are programmed Call to ARC from Digi Modem Digi correctly. Ensure signalling format is Control Panel ARC Call Modem has failed. Note: This is a correctly set for ARC receiver. Ensure Fail communication problem, which is rarely that calls to the ARC or SMS bureaux caused by an equipment fault. numbers are allowed on the PSTN line, eg 0800, 0845 etc
- to2Error codeThis option is only applicable if wireless devices are installed. It is the time window that if a wireless device had its signal ‘blocked’ a fault would display. For example, if the time is set to 30 seconds, then if a wireless device is ‘jammed’ longer than 30 seconds a fault will be displayed. This must be programmed to 30 seconds or less (but not zero) for compliance to EN50131