Phoenix Contact remote terminal unit rtu All models error codes
Codes
- DI0tError codeThe action taken when DIOValue transitions from 0 to non-0. The options are: • “No Action” = No action is taken • “Reset All Alarms” = Resets all active ALARMs - this is the same as setting each ALARM's AlarmCmd parameter to “Reset Alarm” for all active alarms • “Reset RTU” = Resets the RTU - this is the is the same as what happens when the user sets the CPU Module's ModCmd parameter to "Reset Module" • "Reset Password” = This sets the CPU Module’s AdminName, AdminPassword, User1Name, User1Password, SecurityMode, SecurityPolicy, and UserIdentity configuration parameters to their factory default settings • “Issue Command” = Issues the TANK command specified in DIXtoYValue to the TANK specified in PntIndex • “Write Modbus” = Writes the value specified in DIXtoYValue to the MIREG specified in PntIndex using the ValueXX parameter specified in PntParameter
- emp10Error codeFloating point values representing the average temperature from a temperature probe. This data is obtained by setting either bit 5 or bit 8 of the Mode parameter. The Tempx parameters can be converted from Metric to English (or vice-versa) by setting the TempConvert parameter of the V1SCAN point
- emp11Error codeFloating point values representing the air or gas temperature from a multi-element temperature probe. This data is obtained by setting bit 6 of the Mode parameter. The Tempx parameters can be converted from Metric to English (or vice-versa) by setting the TempConvert parameter of the V1SCAN point
- emp16Error codeNumber of active temperature elements
- ext00Error codeFor each Veeder Root device (00 to 16), this is a text string of the highest active alarm for that device
- FC04-07Error codeThe SAT is mounted through the fan deck and does NOT require relocation
- HC04-16Error codeThe SAT is secured to the unit's supply duct opening.
- HC17-24Error codeThe SAT is mounted through the side of the heat chamber below the fan deck, and does NOT require relocation
- nel16Error code24V CPU +5V COMM 15V I/O 15V ERROR