Optimum torna tezgahı All models error codes
Codes
- C64Error codeTilt sensor
- F06Error codeAngle/pressure weighting system missing or not calibrated and EU|AU|RUK
- F07Error codeSensors
- F11Error codeArm raise is controlled and arm angle is decreasing, out of calibration process (arm angle or pressure angle table). Check YV903 valve (wiring and connection)
- F15Error codeJ1939 Failure
- KM1Error codeMotorschütz Vorlauf
- KM2Error codeMotorschütz Rücklauf
- M1Error codeDrive motor
- SP400Error codePressure sensor
- SQ144Error codePothole limit sensor
- SQ145Error codePothole limit sensor
- SQ800Error codeTilt sensor
- SR420Error codeTilt sensor low position
- SR722Error codeArm angle sensor
- xx001Error codeAn ACTIVE failure ( A ) signals that the failure is stive active
- xx002Error codeA DETECTED failure ( D ) signals the cause of the failure has been valid one at least power on, but is inactive
- xx003Error codeA code CODE is linked to failures which have several causes of activation to identify the one of activation (if many conditions are active the code are added)
- xx004Error codeAt power on, the failure log and failure counter are not changed for a failure which was already active at power off
- xx005Error codeThe failure log and failure counter are changed for a failure which internal code is changed
- YV121Error codeRight steering or pothole entry valve
- YV122Error codeLeft steering or pothole exit valve
- YV420Error codePWM platform raising/lowering proportional valve
- YV421Error codeSafety valve for platform lift/descent
- YV903Error codeValve by-pass (pump pressurization)