Nihon Kohden All models error codes
Codes
- AY-600PError codeAY-600P series input unit failure
- CN301Error code
- CNJ011Error code
- CO2Error codeAtmospheric pressure × 0.05 mmHg (±2 mmHg)
- EOError codeAbnormal granules may interfere with an accurate EO count
- is2Error codeIf there is no problem with O 2 calibration gas and calibration cannot be done: • The O sensor has reached the end 2 of its life. • MPU board or EXTMPU board failure
- JQError code641V/JQ-642V Valve Unit ......................................................................................... 3.7
- MDError code640V Combination Syringe Pump Unit ..................................................................... 3.5
- MJError code730V failure • Check if there is a leak in the mix chamber
- MOError code820V2 failure Replace the MO-820V2
- MPError code640V Pump Unit ....................................................................................................... 3.6
- MSError code730V moves the sampling nozzle to the default position with the two motors
- QE-910PError codeCheck that there is no error on the screen when the BIS processor is connected to the instrument
- ReError codeenter the calibration coefficient and all other settings. Then sample counting can be performed. If the error still
- RG-501XError codePaper drive unit
- RS-232CError codeCannot communicate with an external equipment through an RS- 232C port on the optional interface
- SPR11Error codeClass B*1
- UR-3950Error codePump Valves MPU [UR-39371 UR-39373] Serial × 2 TEMP [UR-3940] Serial × 2 UR-3972 Serial MPU PWR NL UR-39721 MPU PWR MS UR-3938 MPU PWR Serial 911765 MS-13 904104 NELL1 OXIMAX PULSEOXIMETRY MOD UR-3908/39081 SpO2
- UR-3962Error codeFront Mother board set
- UTError code7200 MIXED PUMP Board ....................................................................................... 3.11
- WS-671PError codeIf the recorder door is firmly closed but the “CLOSE PAPER MAGAZINE” message and icon are still displayed: Mechanical failure in recorder module
- XPError code602V/XP-612V 2-way Electromagentic Valve .......................................................... 3.13
- ZS-900PError codeIf the transmitter LED does not turn on: • Poor contact between instrument and transmitter or failure in the transmitter or MAIN DIGITAL board. If the LED lights in red: • Transmitter or MAIN DIGITAL board failure