Mitsubishi Electric hassas klima All models error codes
Codes
- 9-6Error code2. DC Fan motoru (Fan motoru/iç mekan kontrol kartı)
- A0Error codeM - Net sisteminin iletişim hatası
- at0Error codeLeft lamp 2-time fl ash Cause: Indoor unit • Trouble of room temperature / indoor coil thermistor
- E0Error codeUzaktan kumanda iletim hatası
- E1Error codeUzaktan kumanda kontrol panosu hatası
- E3Error code
- E4Error codeUzaktan kumanda sinyal alma hatası
- E5Error codeOutdoor Control PCB
- E6Error codeİç/dış ünite iletişim hatası
- E7Error code
- E8Error code
- E9Error codeİç/dış ünite iletişim hatası (İletim hatası) (Dış ünite)
- E15Error codeAnomalous connection of I/D supply air temperature thermistor, I/D rsupply air thermistor anomaly, I/D control PWB anomaly
- E16Error codeI/D fan motor anomaly, foreign matter at rotational area of fan propeller, fan motor anomaly, dust on control PWB, blown fuse, external noise, surge
- E18Error codeAddress setting error of the master indoor unit, no power to the master indoor unit, no connection of super link signal wires between master and slav e indoor unit
- E20Error codeI/D fan motor anomaly, foreign matter at rotational area of fan propeller, fan motor anomaly, dust on control PWB, blown fuse, external noise, surge
- E21Error codeDefectiv e panel switch, disconnection of wiring, defectiv e I/D control PWB
- E22Error codeUnmatched pairing of 1.5kW KX indoor and KX6 /KXR6 outdoor unit, Indoor control PCB anomaly, Outdoor control PCB anomaly
- E28Error codeAnomalous connection of remote control temperature thermistor, remote control temperature thermistor anomaly, remote control PWB anomaly
- E30Error codeIndoor control PCB anomaly, Outdoor control PCB anomaly
- E33Error codePower supply
- E34Error codePower supply
- E35Error codeFaulty outdoor heat exchanger temp sensor
- E36Error codeHigher discharge temperature
- E37Error codeFaulty outdoor heat exchanger temp sensor broken wire or poor connection
- E38Error codeFaulty outdoor air temp sensor broken wire or poor connection
- E39Error codeFaulty discharge pipe sensor broken wire poor connection
- E40Error codeHigh Pressure Error
- E41Error codePower Transistor overheat
- E42Error codeCurrent cut (anomalous compressor over current)
- E44Error codeKXZ Product only. Mismatching of refrigerant piping and or signal wiring, ov ercharging of refrigerant, anomalous control of superheat, anomalous circuit of liquid refrigerant by-pass, anomalous refrigerant circuit of sub cooling coil, under dome temperature Tho-D1, D2 anomaly
- E45Error codeCommunication Error - Inverter to Control PCB
- E47Error codeAnomalous inverter over current
- E48Error codeFaulty outdoor fan motor
- E49Error codeLow Pressure Error
- E51Error codePower transistor error
- E53Error codeSuction pipe thermistor
- E54Error codeLow Pressure Sensor Error
- E55Error codeUnder-dome temp thermistor
- E57Error codeService valve closed
- E58Error codeOverload operation over charge compressor locking
- E59Error codeCompressor start up error
- E60Error codeCompressor
- E61Error codeSignal wire anomaly, O/D control PWB anomaly, INV PWB anomaly, inrush current prev ention resistor anomaly
- E75Error codeCentral Controller communication error
- E85Error codeThe indoor PCB has been replaced but the links/switches on the replacement hav e not been configured the same as on the original PCB, specifically SW8-3/J7 which is currently open/off and needs to be closed/on
- EEError codeİç ve dış üniteler arasında iletişim hatası
- F5Error code
- J41Error codeKablosuz uzaktan kumanda ile çift numarası ayarı
- JP1Error codeUnit type setting