Mitsubishi Electric GUF error codes
Codes
- 0900Error codeTest run
- 2600Error codeDrain error
- 2601Error codeDisconnected water sensor connector
- 3602Error codeDamper motor error
- 4116Error codeFan motor error
- 5101Error codeIndoor temperature sensor error
- 5102Error code/LTXLG SLSH WHPSHUDWXUH sensor error
- 5103Error codeGas pipe temperature sensor error
- 5104Error codeH0 — —: Outdoor temperature sensor error Booting system Unable to register. Operation display comes up with the network remote controller, however it turns off immediately. is on.
- 6600Error codeIndoor unit address setting error
- 6602Error codeCommunication error (Transmission processor H/W error)
- 6603Error codeCommunication error (Bus busy error in the transmission line)
- 6606Error codeCommunication error (Handshake error)
- 6607Error codeCommunication error (No ACK error)
- 6608Error codeCommunication error (No answer error)
- 6831Error codeMA remote control
- 6832Error codeler communication
- 6833Error codeerror
- 6834Error code
- 7101Error codeCapacity code setting error
- 7106Error codeHO - -: Remote controller setting error Booting system Unable to register Operation display comes up with the Remote controller, however it turns off immediately. precautions touching the electric more than 5 minutes replacing parts, follow servicing, always servicing, make sure sufficient attention connect the power completing repairs, wear gloves when pictures power off down the unit. off the power supply Section the cover fixing 4 × 11, indicated back the hinge. Open and lift it off the fix the Lossn