Mindray All models error codes
Codes
- 082-000Error codeValve, normally open
- 115-011Error codeNew M51A module infrared communication board (without IBP)
- 801-680Error codeAlarm LED board
- A22Error codeFAN1 STATE _
- ach30Error code1. Before the leak test, the bellows is not fully inflated. 2. The Y piece on the breathing tube is not connected to the test plug. 3. The bellows housing is not properly installed
- B8Error codeCPU Board PCBA (A5)
- B9-11Error codeVentilator Control Board
- B12Error codeSensor Interface board
- B14Error codeFresh Flow Sensor Board
- B16Error codeTXD FLOW BRD _ _
- B17Error codeRXD FLOW BRD _ _
- C20Error codeTXD AUX BRD _ _
- C21Error codeRXD AUX BRD _ _
- CH1Error codeAn error occurs in the ECG initialization
- CO2Error codeFailure
- DCError code40 Instruction Manual Acoustic Power Data and Surface Temperature Data
- J7Error codeBattery interface board
- J10Error codeCF card board
- N2OError code
- O2Error codeAG GALVANIC O2 ERROR
- out15Error codeCalibration data are not correct
- P14Error codeSolenoid valve assembly
- P19Error codeSolenoid valve assembly
- RJ45Error codeIt is a standard RJ45 connector, providing 10/100 BASE-TX Ethernet communications channels. It connects an Ethernet network or a PC
- SPR11Error codeClass A
- T1Error codetemperature of channel 1
- T2Error codetemperature of channel 2
- T3Error code_ SAFE
- T4Error codeTXD 7024 _
- T6Error codeRXD 7024 _
- T7Error codePEEP
- T9Error codeTXD FLOW _
- T11Error codeRXD FLOW _
- T13Error codeVADJ P
- T15Error codeVADJ FI
- T21Error codeDVDD
- T22Error codeAVCC