Markasi-Belli-Degil All models error codes
Codes
- A-7Error codeVGA Extended Modes (8-Bit Linear Mode)................................................... A-3
- A-9Error codeVGA Extended Modes (16-Bit Linear Mode)
- A-10Error codeVGA Extended Modes (24-Bit Linear Mode)................................................. A-4
- A-11Error codeVGA Extended Modes (Planar Mode)............................................................ A-4
- A-12Error codeVGA Extended Modes (Packed Pixel Mode).................................................. A-4
- A-13Error codeVGA High Refresh Modes (Packed Pixel Mode)............................................ A-5
- A-14Error codeVGA High Refresh Modes (Planar Mode)...................................................... A-5
- A-15Error codeVGA High Refresh Modes (Packed Pixel Mode)............................................ A-5
- A0Error codeSistem su basıncı bar
- A00Error codeInvalid plate type selected The currently selected plate type is not
- A1Error codeSafety group (ASHRAE) A1/A1
- A2Error codeDönüş su sıcaklığı -9 °C
- A03Error code0 min 240 min 30 min
- A3Error codeBaca gazı sıcaklığı -9 °C
- A04Error code0 min 240 min 60 min
- A4Error codeKullanım suyu debisi 19,9 lt/min
- A05Error codeuzun süre geri Fan ya da fan kablosu sorunu değil ya da temassızlık olabilir. Fan ve elektronik
- A5Error codeDış hava sensörü sıcaklığı -9 100 ya da "- -" °C
- A06Error codeFan yada fan kablosu sorunu varsa değişim yapınız.
- A6Error codeAnlık kombi modülasyon değeri %
- A08Error codeElektronik kart arızalı olabilir
- A8Error codeKullanım suyu sıcaklığı (Boylerli için) -9 °C
- A09Error codebildirim 1-Kablo dizilimlerinde yüksek voltaj ,düşük voltaj
- A10FError codeContact BioTek TAC.
- A27Error code0 min 240 min 30 min
- A37Error code0°C 99°C 50°C
- A100Error codeTask control block not available.
- A200Error codeDual Processor Code Version Mismatch.
- A300Error codeOS <Device> not available.
- A301Error code+5v logic power supply level Service Only.
- A302Error code+24v system/motor power Service Only.
- A303Error code+42v Peri-pump motor power Service Only.
- A305Error code+42v Secondary Peri-pump Service Only.
- A400Error codeFlash write timed out.
- A500Error codeRead did not match write (test) <chip>.
- A600Error codeData flash write timed out.
- A700Error codeRead did not match write (test) <chip>.
- A800Error code<Test type> power supply level error.
- A900Error codeMemory allocation heap corrupted.
- AAError codeService: Manual Douoblermie. ............. il.
- AA00Error codeAbsorbance A/D converter never saw the ready
- AA01Error codeCavity probe alarm The blast chiller stops all operating
- AA02Error codeSafety pressure gauge alarm
- AA03Error codeCommunications failure alarm
- AA10Error codeIncorrect CRC alarm in EEPROM
- ABError codeOVERCURRENT \nFAILURE OVERCURRENT_FAILURE generator
- ACError codeAC fail signal Bad power supply
- AC00Error codeExternal RAM test failure.
- AC01Error codeCommunications failure alarm Motor and smoke hood
- AC10Error codeIncorrect CRC alarm in EEPROM Motor and smoke hood