Markasi-Belli-Degil All models error codes
Codes
- 0-1Error code40050 Enable
- 0-2Error codeEnergy buffering selection KEB-1
- 0-3Error code40140 Power Factor State
- 0-4Error codepsi 0-25 psi psi Y
- 0-7Error code40383 MTU speed demand switch
- 0-8Error codepsi 0-50 psi 150 psi Y
- 0-30Error code40077 Pre-crank Delay
- 0-60Error code40078 Remaining Cooldown Time
- 01-1Error codeOCCLUSION Distal Distal pressure Unkink tubing
- 1-1Error codeNakliye ........................................................................................................................................... 2
- 01-2Error codeDistal Distal pressure
- 1-2Error code1- or 2-digit ASCII string, consisting of 0 and 1
- 01-3Error codeDistal Distal pressure
- 01-4Error codeDistal Excessive distal
- 1-10Error code40052 Pre-alarm Activation Time Delay
- 1-13Error codeConnecting to the Printer Port........................................................................ 1-13
- 1-14Error codeConnecting to the Serial Port ......................................................................... 1-13
- 1-15Error codeThe Boot Setup Menu.................................................................................... 1-15
- 1-16Error codePower Supply 1-2
- 1-17Error codeSCR Controlled Rectifier Circuit 1-2
- 1-18Error codeRF Amplifier Circuit Board 1-5
- 1-19Error codeLarge Integrated DECnet Configuration
- 1-23Error codeDriver Circuit 1-5
- 1-24Error codeRF Amplifier Circuit 1-5
- 1-25Error codeSwitching Regulator Circuit 1-5
- 1-26Error codeInternet Name Domains 1-33
- 1-27Error codeLow Voltage Power Supply 1-5
- 03-1Error codeProximal Clamp closed
- 06-1Error codeAIR IN LINE Air detected 1000 µL of air Backprime
- 07-1Error codeAIR IN LINE Distal air-in-line 100 µL bolus Remove and
- 07-2Error codeDistal air-in-line 260 µL of air Remove and
- 08-1Error codeAIR IN LINE Empty 500 µL of air Change
- 10-0Error codeSistem Dış hava sensörü Kesinti
- 10-1Error codeSistem Dış hava sensörü Kısa-devre
- 10-3Error code1 bar = 14.50377 psi
- 10-5Error codeFront Heat Sink Parts List
- 10-6Error code1 psi = 2.036021 inHg
- 10-7Error code| Components
- 10-8Error codeLeft Front Heat Sink. Footswitch Board Components
- 10-9Error codeReplace the Left Power Supply/RF Board Components
- 10-11ParameterSetting the CoinCo dip switches
- 11-1Error codeSistem Kazan sensörü Kısa-devre
- 11-2Error codeCOM Timeout sending
- 11-13Error codeCOM LCR/MCR fail
- 11-14Error codeCOM Internal loopback
- 11-15Error codeCOM External loopback
- 11-40Error codeCOM No interrupt detected
- 12-0Error codeMCP = kapalı
- 12-1Error codeMCP = kapalı
- 12-2Error codeSecondary VTBI The VTBI for