Markasi-Belli-Degil TEEWB304B error codes
Codes
- A1Error codeEvent system
- A2Error codeUser management
- A3Error codeState machine
- A4Error codecomplex data type
- A5Error codePersistent objects
- A7Error codePower on time counter (-> time stamp for error recording)
- A8Error codeCounter for total spins / in service-, in user mode
- C2Error codeUser interface
- C3Error codeUser interface
- E50Error code4. Check weights usage database
- E85Error code5. Power clamp service interval expired
- E89Error code6. Check Keyboard
- E92Error codeDisable left SAPE
- E93Error code9. Disable right SAPE
- E145Error code10. Check content of permanent memories
- E300Error code11. Check availability of keyboard
- E360Error code12. Check Optima Calibration
- E362Error code14. Check Optima Hardware
- E363Error code15. Check Optima inner scanner
- E364Error codeCheck Optima outer scanner
- E365Error code17. Check Optima rear scanner
- E366Error code18. Check Optima main camera board memory
- E367Error code19. Check Optima motor power supply
- E368Error code20. Check Optima main camera board A/D converter
- E369Error code21. Check Optima main shaft encoder zero mark
- E370Error code22.1. Check Optima inner CCD signals
- E406Error code25.3 Check Optima rear shift motor missing steps
- E900Error code26. Check model information
- E901Error code27. Check calibration
- F01Error codeNot complete
- F03Error codeOut of memory
- F04Error codeOut of range
- F06Error codeChannel not found
- F08Error codeAlready exists
- F11Error codeError in expression
- F13Error codeNot implemented
- F16Error codeBad data type
- F17Error codeNot running (still not initialised)
- F20Error codeAccess denied
- H2Error codeWeight minimization is recommended, optimisation can achieve no further
- H22Error code0x492215 Unclamping of power clamp device is disabled
- H23Error codeUnclamping of wheel not allowed
- H26Error codeThe gauge arm was pulled out too quickly (normal operation, ASS calibra
- H28Error codeNEW : The gauge arm was pulled out too slowly (ASS calibration)
- H80Error code0x810510 No provision was made for readjustment
- H90Error code0x492203, - acceleration during start or stop too slow- measuring speed not reached
- H91Error code0x492204 Speed too low during measuring run