Lenovo All models error codes
Codes
- 000-002Error code
- 000-024Error code
- 000-025Error code
- 000-026Error code
- 000-035Error code
- 000-036Error code
- 000-038Error code
- 1-800Error code426911 (Spanish)
- 2Error code
- 11Error codeProcessor Card (370C, 750Ce, 755C, and 755Cs)
- 0012Error code00127 Nach CPU-Upgrade (Thinkpad 600, 770 etc), kann das Bios den L2-Cache der CPU nicht initialisieren
- 20Error codeMemory (See “Memory Checkout” on page 201.)
- 32Error codeExternal Keyboard
- 33Error codeExternal Mouse
- 40Error codeLCD Assembly (See “Digitizer Adjustment” on page 205 and important note for “LCD Related Symptoms” on page 223.)
- 45Error codeExternal CRT
- 50Error code1. Reseat the Drive (FDD-1) 2. Diskette Drive (FDD-1)
- 51Error code1. Reseat the Drive (FDD-2) 2. Diskette Drive (FDD-2)
- 60Error code1. Reseat the Hard Disk Drive (HDD-1) 2. Hard Disk Drive (HDD-1)
- 61Error code1. Reseat the Hard Disk Drive (HDD-2) 2. Hard Disk Drive (HDD-2)
- 70Error codePCMCIA-2 (Replicator)
- 80Error codeCellular Modem (370C, 750Ce, 755C, and 755Cs)
- 81Error codeInternal Modem Card
- 91-397Error code6503 (Spanish)
- 158Error code158 (The hard disk password was not set even though the supervisor password is set.)
- 183Error code183 (Incorrect password entered at the supervisor password prompt.)
- 0185Error codeBad startup sequence settings. Enter BIOS Setup and load Setup defaults
- 185Error code185 (The startup sequence is not valid. Suspect that power was off when the startup sequence was being updated.)
- 190Error code190 (A depleted battery pack was installed when the power was on.)
- 193Error code193 (RF Antenna has been removed.)
- 194Error code194 (The computer is carried through the portal gate.)
- 0251Error codeSystem CMOS checksum bad-Default configuration used
- 0252Error codePassword checksum bad-The password is cleared
- 602Error code602 (Disket okuma hatası.)
- 1820Error codeMore than one external fingerprint reader is attached. Power off and remove all but the reader that you set up within your main operating system
- 1830Error codeInvalid memory configuration-Power off and install a memory module to Slot-0 or the lower slot
- 1962Error codeOperating System not found
- 2000Error codeHard Drive Active Protection sensor diagnostics failed.Press ESC to continue.Press F1 to enter SETUP
- 2010Error codeWarning: Your internal hard disk drive (HDD) may not function correctly on this system. Ensure that your HDD is supported on this system and that the latest HDD firmware is installed
- 2202Error codeBrand Name is invalid
- 2203Error codeSystem configuration is invalid
- 2204Error codeSystem configuration data is invalid
- F4Error codeThe NVMe password prompt appears
- F6Error code• For Windows 7: Opens the Communications settings window, in which you can preview your video image, take a snapshot of your current image, and change the camera and audio settings. • For Windows 8: Starts the Lenovo Settings program, which enables you to change the camera and audio settings